Point my VPN to Home Assistant
@greencharlie100 wrote: I have a VPN (open VPN) set up on my PI which points to a webpage hosted on an nginx server running on my pi. How can I configure HA so that the VPN URL points to HA rather...
View ArticleHomematic Doorbell Sensor, where to start
@PatrickSteiner wrote: Hi all, I’m using hassio with my Homematic CCU2 to monitor and automate some one my window blinds, thermostats, etc. All this worked “out of the box” with the entities card in...
View ArticleAutomation of turning lights on when GPIO « GP2 » is closed
@Vbdino wrote: Hi, I new to this raspberry pi. I have an alarm system Elk M1 that currently turns on the living room light when I enter the drive way by sending signal to a x10 wall switch. I am...
View ArticleClik here to view.
Configurator access bad site: ace.c9.io
@DkAutomater wrote: Hi Forum, i am using Heimdal and then i access Configurator in Hassio i see that “ace.c9.io” is prompting me with Phishing content. Who can fix this? Posts: 1 Participants: 1 Read...
View ArticleNetAtmo base module sensors lost since upgrade 0.101.2 < 0.102.X
@Freemann wrote: Since upgrading from 0.101.2 to 1.102.b1 my NetAtmo Base module sensors are lost. I’m still migrating from Domoticz to HA so I can compare the 2 systems how the are working with...
View ArticleKodi API: Start random South Park Episode from script
@jones wrote: Can anyone provide a script that uses the Kodi South Park Add-On to start playback of a random episode from hass? When the Add-On is opened there is an option called “Random Episode”. Is...
View ArticleGoogle calendar problems
@maurizio53 wrote: After switching to hassio from hassbian and after copying all the full configuration folder into hassio i get the following error about the google calendar integration: 2019-11-19...
View ArticleTelegram, camera_proxy and trusted networks
@tachioma wrote: On version - 0.101.3 I’ve neglected it recently so I thought I’d update go through trim out any old config and rectify a few issues. The only one i’m struggling with now is my...
View ArticleGroup visibility issue
@jeppper wrote: I am on Hassbian and have created a group with just one sensor just for using the group.visibility service. wind_chill: name: Wind chill view: false entities: - sensor.windchill I have...
View ArticleFfmpeg_noise - Audio stream ends after 1min 5 seconds (D-LINK DCS 932L)
@marcus87 wrote: Hi, i have a dlink dcs 932L camera. I’ve configured ffmpeg_noise to use the audio stream. The noise notification works for about a minute. After that, the sensor stays in clear state....
View ArticleMini amplifier that can integrate with Home-Assistant platform?
@alexmo wrote: Hello, I’ve a ceiling speakers in our bathroom, and I wants to connect them to a mini amplifier with LAN network connection (no need WiFi), so I can play Spotify on it… controlled by...
View ArticleWhat are the differences between Home Assistant vs Hass.io
@jm35 wrote: Hi, I’m new in domotics and i dont’ understand what is what beetwen Home Assistant vs Hass.io I installed Home Assistant on a Raspberry Pi by using the Hass.io installer and i m learning...
View ArticleClik here to view.
How add 'slimme meter' via AMA0 connector Rpi
@scdhome wrote: In the next lines I show you how to connect your HA to the ‘slimme meter’ with a small piece of hardware and small extra configuration ‘under’ HA. First of all you need to make the...
View ArticleRS485 modbus timing issues
@paul_c5x4 wrote: Have a couple of cheap SHT20 modbus humidity & temperature sensors attached to a USB<->RS485 adapter. Also have a couple of other modbus capable devices I wish to connect...
View ArticleHelp with scripts and parameters
@xalex75 wrote: Hi. I’m trying to use my living room light as a notification for various events, by flashing different colors. For testing I setup an automation that calls a script when an...
View ArticleBest way to implement presence detection / pass through detection
@jasper1983x wrote: Alright smart minds, i’m looking for your advice So, my curent situation is that my neighbours have to/ are allowed to walk through my back yard, because that is the only way for...
View ArticleIncremental change of light temperature
@Alex_Lopez wrote: Hi all, I have both a light and a remote (the one with bright and temperature buttons) from Ikea integrated into Hassio. Yesterday, I coded a automation in which when brightness...
View ArticleClik here to view.
Glances integration on v.0.101.3 (no connection to host)
@RalfP wrote: Hi helping brains out there, I’ve installed the glances add-on from the repository, linked it to influx, grafana is showing results, everything fine so far. Now sensors: according to...
View ArticleSchlage Connect Lock Unregistered Node
@AnonHA wrote: Hi everyone, I’ve been attempting top as a schlage lock to Hass.io. I have an aeotec z-stick S2 and first used in it’s normal enrolling process by removing the stick, pressing the...
View ArticleHive Motion Sensor
@Puntoboy wrote: I’m struggling with making a automation for my Hive motion sensor. What I want to do is: Trigger: Motion detected condition: between sunset-10pm action: turn on light for 2 minutes....
View Article