Clik here to view.
Cant see any of the text on buttons
After i did a update all of text on the buttons for stuff wont render. The buttons are there and i can click them, just cant see the text. 4 posts - 3 participants Read full topic
View ArticleMissing something really obvious
I tied to use the UI to accomplish what I want, but I couldn’t figure it out, so I wrote it out in yaml, but it’s still not working properly… Basically I have a ‘dumb’ blue ray player so I wanted to...
View ArticleElga Ace reading energy cost parameter
I’ve got an Elga Ace connected to HA and can successfully read many parameter: Elga Ace - GTW-08 - RS485/ Modbus-TCP (WiFi) gateway - HA I would like to read(write) the parameter on the Elga Ace...
View ArticleEnabling long term statistics
I previously had a very long data retention time and this resulted in a huge database (100GB+) Since then I have reduced that down as I should be making use of long term statistics. I had some SQL...
View ArticleKNX - Dimming Control LED driver
Hello, I’m trying to control my LED strip through the KNX hub. The strip is connected to a dimmable LED driver (constant voltage) which I can control through a Zennio Z35. This has an on/off button...
View ArticleClik here to view.
Temperature sensors always showing 100% battery
Hi all! I am new to Home Assistant and recently set up a Raspberry Pi 3B (will be upgraded to a Pi 4 soon) with Pi OS (Debian 12) and Python 3.13.2 on it. I installed Home Assistant Core 2025.3.4...
View ArticleVoice PE stopped outputting any sound
Hi, I have two Voice PE in different rooms on the same WLAN and they worked great for a while. However now one of them does not output any sound anymore, and the trigger phrase does not register. I...
View ArticleConfiguration.yaml for rest platform
I have a PicoW that reads temperature and humidity from a DHT22 sensor. Readings are then put into json format. I can make Home Assistant get the readings via two sensors configured as follows:...
View ArticleTemplate Sensor for "Kwartiervermogen" (15-Minute Average Power)
Hi everyone, I’m trying to create a template sensor in Home Assistant that continuously calculates the average power consumption within fixed 15-minute intervals. The sensor should reset when a new...
View ArticleMQTT Discovery Base Topic at Device Level
Hi all, Is it possible to have an MQTT discovery Base Topic apply to an entire device, rather than having to define it for each individual component in the device discovery payload? I’m using MQTT...
View ArticleMatter device not connecting when further away from ZBT1
Hello, I have 12 Matter devices, which were all connected via the Matter Web UI commission node dialogue (Thread/OTBR). All devices work well, except one. No problem when it is close to the ZBT1, but...
View ArticleClik here to view.
Structuring Scripts, Automations and helpers
So once you dive in, all the code starts to explode. When I started, all the helpers, intents and stuff went into the configuration.yaml. My automations are all GUI made, so in the automations.yaml...
View ArticleHow to setup Ecobee using HomeKit on HAOS?
I would like to connect my Ecobee 3 so I read all Ecobee and HomeKit pages in the wiki, but those did not provide any insight. I do not have Apple devices, thus no HomeKit hub or whatever. I installed...
View ArticleWrong temp units displayed in clock weather card
i recently installed hacs, then pirate weather and the clock weather card. restarted. i have an existing sql integration that pulls local weather data from a local database that is populated by a...
View ArticleClik here to view.
ID of integration
How can I find out the ID of an integration that doesn’t have any devices? There is nothing in the address bar. 2 posts - 2 participants Read full topic
View ArticleTuya sensor presence
Hello I bought a presence sensor from Tuya. I integrated in z2mqtt without any problem and it is working well. I have all parameters but it’s talk a lot !!! My zigbee is full with only one. Every...
View ArticleBlueprint or not?
Tags to add: GPS, BT, Serial, NMEA 0183 I live in an RV, would love to be able to track the home on map, trigger on locations and whatnot. I have 15 minute updates based on reading location from the...
View ArticleSetting up a current sensor with d1_mini
I purchased Mottramlabs Wemos D1 Minni Version ESP8266 Mains Power Sensor and a SCT-013 100A/50ma sensor and put it on my d1_mini clone ( D1 Mini NodeMcu ESP8266 ESP-12F) It installs correctly in...
View ArticleCleanup HA database?
Is there some way to find and remove old unused entities and other such debris from the HA database 1 post - 1 participant Read full topic
View ArticleHow to make notification action conditional on message content?
I’m trying to use Gemini AI to send a notification to my phone if a person is detected by my video doorbell. I’ve got the automation sending images and descriptions to my phone, but I can’t work out...
View Article