Help Wanted: Paradox Alarm Interface (PAI) 3.6.1 error "Invalid PC Password"
Hi I’m attempting to integrate a Paradox MG5050 panel with Home Assistant using the Paradox Alarm Interface (PAI) 3.6.1 add-on, connected via a local IP connection to an IP150+ module. The connection...
View ArticleClik here to view.
ESPresence - Pixel 9 Pro - Weak Signal Strength
Hopefully this is a suitable place to ask this question. I’ve just started exploring ESPresence for room presence data. Currently have 4 nodes in 4 rooms - ESP32-C3 Superminis Device detection works,...
View ArticleBT Realtek keeps dropping, any help, pls
I have HA Green and it has been great! The only issue I have is that the BT adapter listed below, which controls my SwitchBot blinds, has dropped out after a year. It has been fine for a while This is...
View Article"On with timed off" for multi-gang switches, any success?
Has anyone successfully used a multi-rocker / multi-gang zigbee switch with “on with timed off” feature? In zigbee2mqtt’s documentation (like this ), the feature should be used by publishing messages...
View ArticleClik here to view.
Frigate not working as expected on Proxmox
I have a stand alone machine setup solely to run Frigate. Its Proxmox with a Frigate container running Docker. Its an Intel (Dell Optiplex 7050 Micro MFF, i5, 16GB RAM, 256GB SSD, 1tb data drive). I...
View ArticleCarriage returns in MQTT publish causing remote decode issues?
I’ve got a weather automation using Met Office data, which I’m trying to send out via MQTT to use elsewhere on my network. The automation action is set up like this: - data: topic: metweather/weather...
View ArticleStart vacuum robot if it was more then 4 days ago
Hi there! I’m not new to home assistant but I am new to the automation world of HA. Normally I always program things in Node-Red, now I would like to start making automations in HA itself. What I...
View ArticleUpdating Zwave JS UI breaks zwave
I’m running HA as a VM in Proxmox with an Aeontec Zwave dongle passed to the VM by Device ID. This works fine until it comes time to update ZWave JS UI (which gets frequent updates). >50% of the...
View ArticleAssistance with Automation Based on Days of Month or Months in a Year
Hi there I’d like to setup an automation that is triggered by a virtual button and then based on time of year (for example, January to June) turns on certain lights (and their associated effects) then...
View ArticleNGINX Home Assistant SSL proxy and Grafana
Hi all, I am sucessfully using a Home Assistant installation with the NGINX Home Assistant SSL proxy add on. Recently I startet to look into InfluxDb and Grafana and set up these add ons, too. Both...
View ArticleHumidity sensors low battery notifications
Hello All, I have nine humidity sensors and would like to receive a notification on my iPhone when the batteries fall below 10%. I’d like the notification to include the name of the sensor(s) that...
View ArticleClik here to view.
HA - Energy Dashboard with wrong PV-results (at nigth)
Hi there, I’m new in HA and in that forum. Set-up my HA and also energy-board. But the PV-results are wrong and I have no idea, what’s going on. If I go into survey with all entities, the results of...
View ArticleClik here to view.
Help! My HA install isn't working after reboot
Hi all My HA has been running flawlessly up until I rebooted the PC I have it running on today and now it boots up but most of my key integrations won’t load. From the web UI I can’t access the backup...
View ArticleClik here to view.
Energy dashboard data unavailable
My Energy dashboard has been running perfectly since… Well: since it was introduced. Since two days however the dashboard displays “there is no data to show” despite that data being in the system for...
View ArticleClik here to view.
Comparing sensor value to attribute value to set sensor as true (On) or not...
Hiya, I’m trying to get my home battery to charge when the price is lowest in 24h and to discharge when price is highest in 24h. I therefore need to compare the value from sensor...
View ArticleClik here to view.
Only display actual weather icon
I have 2 weather integrations in my system. KNMI and met.no. Now I only want the actual weather icon on a custom:mushroom-template-card but I can’t get this to work. Does anyone know how I can do...
View ArticleZ2M smart plug reporting wrong values
I moved 10 smart plugs (IKEA inspelning, innr SP240 and Tuya) from ZHA to MQTT. They often fail to report updated values when I plug in a device. Then when I go to the HA Zugbee2MQTT menu page, visit...
View ArticleTrying to hide border on entity card
Hi, Try to eliminate border on entity card, but it remains after trying couple things. Any ideas? type: weather-forecast entity: weather.home forecast_type: daily show_current: true show_forecast:...
View ArticleInput button Title color based on different entity status
This is undoubtably in the wrong category; but, being new here, I didn’t know where else to put it. Sorry. I have a tile connected to an input button entity. When the icon is clicked, an automation...
View ArticleClik here to view.
Advanced Camera Card Cycling Primary Display
Hi guys im using advanced camera card in live grid mode to display hikvision RTSP streams and I would like to cycle through the primary displayed large image every few seconds. Is there a way to do...
View Article