Double take person entities missing
I set up double take with frigate and mqtt last night, I have 3 people with pictures but no entities were created, I’m not sure why. 1 post - 1 participant Read full topic
View ArticleEnOcean MQTT - message not interpretable or data missing
Hi, I have setup an USB300 and integrated it with EnOcean MQTT (dev). Overall the setup is ok, the devices entered in the config are getting created in MQTT as well. So far so good. The problem is - I...
View ArticleClik here to view.
Change of toggle not in logbook?
Hi, Something strange : I have a toggle input_boolean.toggle_christian_in_bed Based on a bedsensor I toggle it. This occurs this morning at 06:49:00 (off). I can see that in the logbook and the...
View ArticleShell_command not working as expected
if i use shell_command: test: echo 'test' > /config/test it works… if i use the syntax shell_command: test: echo '{{ variable }}' > /config/test it doesn’t work… strange thing, with mkdir...
View Article2 coordinators in separate buildings - unable to add Zigbee relay
A complete n00b, just started to fiddle around with HA, aiming at controlling my home. Purchashed 2 pcs SMLight Ethernet Zigbee coordinators, placed one in the house and the other in the garage. Full...
View ArticleStuck at "Loading Data" on login page when recorder not loading
I hadn’t got this issue before, but I’ve just got an issue with my external DB, and trying to login into the UI was impossible. It was stuck at “Loading Data” on login page. I had to login using SSH,...
View ArticleCloud text to speech suddenly stopped working
I had a Voice Preview set up and working fine, using Home Assistant Cloud speech to text, text to speech, and OpenAI. Suddenly it now doesn’t understand anything said. The debug logs for the voice...
View Article"OK Nabu" Wake Word Reliability for Non-Native Speakers in Home Assistant...
As a non-native English speaker, I’ve encountered some challenges with the “OK Nabu” wake word. The wake word work1. s well with my voice (adult male) 2. My daughter can trigger it by emulating a...
View ArticleQwen3 llm no_think
qwen3 just came out, and the small models seem promising for a quick llm based interaction. however, I can’t turn off the thinking mode. I tried to place /no_think almost everywhere in the prompt, but...
View ArticlePlease, I need some advices to make a zigbee relay controller
I have an ESP32 flashed with tasmota, that command a 8 way relay module using the ESP32 GPIO pins to control some devices. But right now I have serious problems with my wifi lan, because there is a...
View ArticleClik here to view.
My Config folder has disappeared
My Config folder has disappeared. I can’t get to the samba share from my PC, nor see it in file editor. My Automations etc are still there and editable but I can’t edit see the YAML files. I have...
View ArticleFile paths confusion and File integration pains
Hi, my HA install is from 2018 originating on a Pi (started as Hassio? I don’t remember), and now running in a Proxmox VM. I’m now getting issues getting a File integration to run properly, and...
View ArticleAlarm.com doorbell integration
I recently connected alarm.com integration via HACS, but it only pulls the alarm sensors and not the cameras or doorbells. I primarily want the doorbell to access the motion sensor for an automation....
View ArticleAqara E1 Roller shade: Position entity no longer provided by ZHA?
I don’t know when it started, but my Aqara Roller Shade drivers now only have the up/down control showing up as active on the dashboard. The previously working position slider is now inactive and when...
View ArticleFingerbot receives two messages or reacts twice?
Hi everyone, I’m having this very strange problem when a Fingerbot switch is toggled in an automation. I can reproduce the issue: When I trigger automation a UI button, the fingerbot reacts...
View ArticleHassStartTimer not working with voice assist on esp32
Hi, It’s my first post here. I hope it’s the right place to post. I need help with the voice assist, running on an esp32-S3, where the command to set a new timer does not work. All the other commands...
View ArticleSchlage Encode Plus - control from Home Assistant
I have added a Schlage Encode Plus to Home Assistant via bluetooth and it is now connected to my thread border router and shows up in Home Assistant as a HomeKit device. I can see the battery level,...
View ArticleFiremote pause as an action
Hi all, I have Android Debug Bridge installed & working, I also have Firemote card working. My tv is a FireTV & all is fine. I also have Notifications for FireTV & this is working. I have...
View ArticleSure Petcare Catfap doesn't report anymore
I used the Sure Catflap for years quite stable, but now it does not report my cat movements anymore. Tried both official integration (that doesn’t give me the cat location sensor or binary sensor) and...
View ArticleUsing an "alert" with repeat notifications to repeatedly trigger an automation
I have an existing alert that sends me an actionable notification every X (defined) minutes when my garage door is open. I would like to enhance this by also “triggering” my VPE to start a...
View Article