Markdown card question
Is this normal? sensor.zod_raid_status.state is offline so returns nothing. But I would still expect the title, Zod RAID Status to appear on the dashboard. When Zod is online it appears as expected....
View ArticleUsing multiple Z-Wave sticks to extend coverage
As I posted many times in the past, my Z-wave struggle mightily due to the very large home and building materials. Most edge devices depend on 3 or 4 hops, and are just unreliable, especially...
View ArticleNew Home Assistant version rejects Tasmota MQTT discovery messages
Where can I disable that check? The old version did not do it. I can not change what Tasmota does. The HA checks are way to strict, this should be a warning, not an error that kills the sensor. Error...
View ArticleProblem with time-triggered automation
Hello, community! I’m newbie in the Home Assistant and trying to do my first steps in home automation. I have VM with HA deployed from OVA template. System has Zigbee integration with 10 devices. NTP...
View ArticleDSMR Smart Meter : ‘Slimme meter’ or ‘P1 poort’
Forum Question (in English) Hi everyone, I have Home Assistant and want to connect it to the P1 port of my smart electricity meter. I bought a P1-to-USB cable, and it is immediately recognized on the...
View ArticleTemplate for a light
I have a IR lamp which i can manage via a broadlink script and a selection list with all the commands, like on, off and some colors like white etc. With the new posibilities of hass, specialy the area...
View ArticleCard that shows which button (name) was pressed
Hi, I try to bring my climate to home assistant via ESP IR transmitter and receiver. I have a Button for my favorite settings in the climate (about 6 buttons),I also have installed a receiver on my...
View ArticleClik here to view.
Why have I got a Red ! against my Template Sensor?
Looking in Settings | Devices and Services | Helpers, I see this: This is the code I have in the editor: {# The next two "dummy" lines are to force HA to parse the two sensors#} {% set _ =...
View ArticleEnergy dashboard historic data lost OS16 update or new sensor template
Hello all, Yesterday I realised that all my energy dashboard historic data was gone. The only changes I did was updating to OS16 and adding a new meter sensor via template. I was able to restore the...
View ArticleClik here to view.
Can't centre card
Read heaps about this here, tried several solutions, but for the life of me I can’t find a universal solution to have my button-card centred. My view is set as a panel (single card) in which I have a...
View ArticleClik here to view.
Cannot add Nanoleaf Downlights
Hello i successfully added my thread network to HASS but i cannot add the lights (already paired with the nanoleaf app and homekit) when i trigger the pairing mode in homekit and copy the provided...
View ArticleAlexa app saying "Server is unresponsive"
Just wondering if there is some issue with Amazon Alexa’s integration with Home Assistant? I am not able t use voice control for anything in HA. When I go to the alexa app on my phone and go to my...
View ArticleCalculate seconds between two times, to determin loading Car via PV or Grid...
Heyhey In my Homeassistant I created an “Abfahrtszeit” input DateTime Helper (with time only, no date), to set the departure time, when I leave with my car. When conecting my car to the wallbox I want...
View ArticleIs there a way to increase the amount of history of an automation
Hi, I’m using the “stored_traces” command to increase the quantity of run history an automation can store. trace: stored_traces: 20 Works great per automation, but I wonder if there is a way to make...
View ArticleGo-e Gemini: PV surplus charging not working
Hello, I’m trying to get PV surplus charging working with my go-e Gemini charger. I’ve installed the ha-goecharger-api2 integration in Home Assistant and enabled APIv2. The charger is reachable...
View ArticleTAPO Plug: My if then else doesn't work
(topic deleted by author) 1 post - 1 participant Read full topic
View ArticleRegularly Incorrect Readings from Tasmota MQTT IR – Power Meter Value
Hi everyone, I’m using the following Jinja template to read the MQTT value from my Tasmota IR sensor in order to track energy consumption. It includes a simple plausibility check to filter out...
View ArticleClik here to view.
Bluetooth proxy max connections
I have a ESP32c6 configured as BT Proxy but i can’t connect more than 3 devices and i can’t figure out why. Documentation say it’s possible to increase the number of connection and in yaml...
View ArticleHow to configure these 4 motion sensors?
Hi All, I hope you are well. Imagine I have 2 different vendor PIR sensors upstairs hallway and 2 different vendor PIR sensors downstairs. I want two sensors from downstairs to turn on the light...
View ArticleDashboard Graph advice please
I have an entity solar charger.yield.today that reports the amount of energy (kWh) generated so far today. I can get a graph of that progression throughout today. Why I really want to see is the last...
View Article