Adding a Shelly on Integration UI fails
Every time I restart HA it discovers a new Shelly switch with IP address. I press “Configure” on Integration panel, “Do you want to setup?” - “Submit”… it works for a while and then reports “Failed to...
View ArticleKodi integration strange warning message - how can I help?
it kind of works but the log is full of following messages (every 5 seconds)… What shall I do to help it? Logger: homeassistant.config_entries Source: config_entries.py:239 First occurred: 10:57:28 AM...
View ArticleNew to the community and looking for specific tutorials and learning material
hello, I am new to Home Assistant. I do not even have a Raspberry P, but i am going to buy one soon to install HASS. I will try and start to figure out how to use it with lights and led strips, but i...
View ArticleIssues with KNX
Hi, I have issues with the latest KNX release 115. Since then the system can not find the KNX entities anymore. Here is my entry in the Configuration.yaml: knx: tunneling: host: '192.168.0.10' port:...
View ArticleClik here to view.
Sensor or variable to check if automation has been triggered today
Working from home has been good for me so far, but it messed up my automations based on presence in home assistant. I have a vacuum robot that is triggered for a scheduled cleanup every weekday at...
View ArticleCurrent sensor - bi-directional - how to do calculations syntax
I have a D1 Mini running ESPHome Connected, I have a ADS115 ADC and to that an ACS712. This working fine and I read approx. 2.5v with no current. The ACS712 is a bi-directional current sensor...
View ArticleKNX problem after upgrade to 0.115
Hello, after upgrading to the new HA version I get the following KNX errors after boot: Error: KNX bus did not respond in time to GroupValueRead request for: 1/6/1 Error: KNX bus did not respond in...
View ArticleOnewire DS06 and DS08 support?
Hello, DS06 (family 28) is a “dual addressible switch” but in HA I get entities “Temperature” and “Pressure”? It looks perfectly ok if I use “owget” to the same owserver, so HA is not interpreting it...
View ArticleSpotify Integration - "500 Internal Server Error"
I can’t integrate Spotiy anymore in Version 0.115.2. First, it ends in " INVALID_CLIENT: Invalid redirect URI". As written in the documentation, the URL needs to be corrected manually. After that, the...
View ArticleSensor input throttling - Comfoconnect
Hi, is it possible to throttle sensor input? The comfoconnect integration (https://www.home-assistant.io/integrations/comfoconnect/) gets multiple sensor values every seconds to my HA instance. I...
View ArticleClik here to view.
Projected ned date template fails
I have this template to predict if I am going to run out of data on my broadband plan: - platform: template sensors: projected_end: friendly_name: 'Projected End Date' value_template: > {% set...
View ArticleHomematic - CCU2 Connection seems not to work
Hello, I actually have to switch from an old homematic version ( 0.103.0) to the actual one. But this seems to be hard work. First of all, I do not get the connection to my homematic CCU2 running. I...
View ArticleClik here to view.
Develop and rebuild template sensor to python_script
Continuing the discussion from Heads up! Upcoming breaking change in the Template integration: since Ha 115 checks for all states mentioned in a template sensor continuously now, below template causes...
View ArticleClik here to view.
Automation - time pattern - not working since 0.114
Hi all, my automation time pattern is not working well since 0.114. I have upgraded 17.9.2020. Since this my automation is started every hour (:00 minutes), but it should be started every half past...
View ArticleScipt could not be setup
With the latest update i have a failure in my notifications. The following integrations and platforms could not be set up: script I checked my scripts. They all work so the scripts do load. It...
View ArticleClik here to view.
NFC Scanning - how to fire the App
I have purchased these RFI tags, I’m able to write and read from them on the app (going to App Configuration) albeit doesn’t always work and never quickly. I have a question; How do you actually use...
View ArticleZ-wave HassOS 4.13 in VirtualBox - Cannot find Aeotec Z-Stick
Hi all. I am at a loss here. I’ve had HA running on a RPi, been working so-so. I am now trying to move the Z-wave stick to a Windows 10 server computer that is always on. I installed VirtualBox and...
View ArticleWait for Trigger & Choose with Value Template…
Hi, been playing with the new Wait for Trigger and was wondering if I’ve missed something when combining it with choose: Working set up: Automation calling IOS actionable notification Second...
View ArticleHowto choose the first of 2 _next_alarm sensors
I have 2 phones connected to my HA. How do i get the first alarm of the 2 sensors ? sensor.sm_g973f_next_alarm and sensor.sm_g988b_next_alarm 1 post - 1 participant Read full topic
View ArticleIcon_template not working anymore since 0.115
Hello! Since the 0.115 update the below icon_template does not work anymore. If I test it in the Template editor it works, it detects the state and updates. The icon however is not updated on the...
View Article