Hi,
i’ve got this sensor:
{{states('sensor.last_fuel_top_up_ryd'}}
which gives me that value:
2021-09-13 10:43:20.296000
I’d like to truncate or crop the last 9 digits to show only date, hours and minutes. “round” doesn’t work since it’s not a number and “truncate” also doesn’t help.
Is there any other function I could use?
Best
2 posts - 2 participants
I’m brand new to everything, so my apologies in advance for the incorrect terminology and confusion.
I installed Ubuntu on a clean ssd in an i5, then installed HASS Core in a docker container.
It’s running nicely.
I would like to use some devices that require ESPHome.
My understanding is the HASS Core in Docker will not permit use of the ESPHome HA Add-On, right?
But, I can still run ESPHome on the machine.
I installed ESPHome and running: “Sudo docker images” and Sudo docker ps" both show both esphome/esphome as well as home-assistant.
And, I can run the esphome wizard to create .yaml files.
That’s as far as I’ve gotten.
I don’t have the esp hardware yet, but I wanted to be ready for it.
I really have no clue how to next proceed. I tried to install the HA integration and it wants a host and port. When I put in 192.168.1.193 and 6053 I get:
Can’t connect to ESP. Please make sure your YAML file contains an ‘api:’ line.
What should I do next?
Thanks!
1 post - 1 participant
Hi.
I’ve managed to write an automation which uses a repeat until loop and gets into an infinite loop sometimes.
I’m debugging this, but this is complicated by the fact I can’t see how to stop it. Is there some way on interrupting a running automation?
3 posts - 2 participants
Hi,
I have a ethernet zigbee gateway registered in SmartLife.
I integrate my SmartLife account with Tuya.
But the gateway is mark as unsupported.
How can i fix this?
thank you
1 post - 1 participant
I’m using a ESP-WROOM-32 flashed with tasmota.bin and I’m a beginner using Home Assistant. My pressure transducer is connected to a voltage divider to scale 0-4.5v to 0-2.44v for the ESP-32S. Can anyone point me to a example with the correct usage for Span and Zero? Everything I can find on the topic points to the use of ESPHome and I’m trying to keep things simple. I still don’t understand how ESPHome can benefit my project.
1 post - 1 participant
In the HomeKit bridge config editor, in the UX, it lets you choose items in a dropdown - however I have some older ones that used to exist and no longer do, and so the checkboxes don’t render in the dropdown, and the items still show in the list. Attempting to save results in an “invalid input” kind of error message.
Is there a way to edit the configuration for the HomeKit add-on when you did the configuration in the UX?
Thanks in advance.
1 post - 1 participant
Hello,
I am migrating from SmartThings and my Z-Wave AEON Labs DSC06 Smart Energy Switch events are not reflecting in the Home Assistant UI.
I can click the switch in the UI, and the switch turns on/off, but when I press the button on the physical switch, the UI does not update. Needless to say, the energy information is not updating as well.
I turned on debug logging and received the data below when pressing the physical switch’s button on and off.
Sorry, I do not know how to attach them.
All updates are applied.
Any suggestions?
Thanks in advance.
Subscribed to Z-Wave JS Log Messages…
2021-11-29T00:12:02.436Z SERIAL « 0x0113004984200d0410012531322770857286ef8274 (21 bytes)
2021-11-29T00:12:02.438Z SERIAL » [ACK] (0x06)
2021-11-29T00:12:02.439Z DRIVER « [Node 032] [REQ] [ApplicationUpdateRequest]
payload: 0x200d0410012531322770857286ef82
2021-11-29T00:12:02.441Z CNTRLR « [Node 032] Received updated node info
2021-11-29T00:12:03.927Z SERIAL « 0x0113004984200d0410012531322770857286ef8274 (21 bytes)
2021-11-29T00:12:03.928Z SERIAL » [ACK] (0x06)
2021-11-29T00:12:03.929Z DRIVER « [Node 032] [REQ] [ApplicationUpdateRequest]
payload: 0x200d0410012531322770857286ef82
2021-11-29T00:12:03.931Z CNTRLR « [Node 032] Received updated node info
2 posts - 2 participants
I have two different sensors that the state displays the time such as 2021-11-28T22:36:27+00:00 and 2021-11-28 23:05:15-0800 but when I put both of them in an entities card one shows the last updated time such as “38 minutes ago” and the other shows “2021-11-28 23:49:16-08:00” however I would like for both of them to show like “38 minutes ago” but I cant seem to figure out exactly what needs to be changed to get the desired output. Ive been reading up on templates, but a bit confused and after trying a bunch of samples and changing the values to my sensor I’ve had no success.
These are the two sensors I’m trying to put into the entity’s card…
And this is the current output it gives me which Id like to change so that both show “xx minutes ago”
For the Fordpass entity I can get the “Last updated xx minutes ago” to show as secondary info but I want that to be the primary output figure.
Hoping someone can help point me in the right direction.
1 post - 1 participant
Added the tuya integration, and followed steps listed here. Everything on the tuya iot side works perfectly, but unfortunately, HA integration webpage is asking for username password instead of client credentials.
Screenshot of the issue:
Screenshot expected, as shown in this guide
Sorry, i just joined and can not post more than one media
Any thoughts on how to get pas this? Needless to say, my usual tuya account and password fails to authenticate the integration.
1 post - 1 participant
I want to judge the status of the window before opening the cover. If the window is opened, the cover will not be moved, so I added a template cover to replace the actual cover in the UI, but the set position never works. (open and close works well), I think it is a problem of transferring position, The position when the template cover position is clicked should be transferred to the actual cover
My code:
cover:
- platform: template
covers:
study_curtain_tpl:
unique_id: study_curtain_tpl
friendly_name: study_curtain_tpl
position_template: "{{ state_attr('cover.study_curtain', 'current_position') | int }}"
open_cover:
- service: automation.trigger
target:
entity_id: automation.study_cover_open
close_cover:
- service: automation.trigger
target:
entity_id: automation.study_cover_close
stop_cover:
- service: cover.stop_cover
target:
entity_id: cover.study_curtain
set_cover_position:
- service: automation.trigger
target:
entity_id: automation.study_cover_pos
data:
position: {{position}}
automation:
- id: study_cover_open
# .......
- id: study_cover_close
# .......
- id: study_cover_pos
alias: study_cover_pos
trigger:
- platform: state
entity_id: input_boolean.test
action:
- choose:
- conditions:
- condition: state
entity_id: input_boolean.study_window
state: 'off'
sequence:
- service: 'cover.set_cover_position'
target:
entity_id: cover.study_curtain
data:
position: {{position}}
- conditions:
- condition: state
entity_id: input_boolean.study_window
state: 'on'
sequence:
- service: persistent_notification.create
data:
message: 'notify something'
default:
- service: persistent_notification.create
data:
message: 'notify something'
1 post - 1 participant
I get this error every once in as while, but im an admin on the system
Logger: homeassistant.components.hassio
Source: components/hassio/init.py:557
Integration: Home Assistant Supervisor (documentation, issues)
First occurred: 7:04:50 PM (1 occurrences)
Last logged: 7:04:50 PM
Can’t read Supervisor data:
1 post - 1 participant
I see this error in my log, but I don’t have any helpers
Logger: homeassistant.helpers.service
Source: helpers/service.py:130
First occurred: 4:44:30 PM (2 occurrences)
Last logged: 4:44:30 PM
Unable to find referenced entities switch.garage
1 post - 1 participant
Hi all,
I was reviewing the doc on MFA and it talks about the NOTIFY MULTI-FACTOR AUTHENTICATION MODULE.
I don’t know if this is a dumb question but… is it possible to use native HA mobile app notifications for this? I know this may sound silly since I’m asking about using the app that could potentially be needing to be authenticated for an authentication request but: I think this makes sense in cases where you have multiple devices.
I verified that I have the mobile app notification working: I made a button that triggers a test message using the notification service (notify.mobile_app_pixel_5 in my case) and that does work.
But when I try to enable the Notify One-Time Password, it tells me " No notification services available.".
If this is something that’s not supposed to work: does anyone have any suggestions for notification integrations that would let you do this securely?
Note: I do already have totp (Authenticator app) set up and that is working but this sounds like it would be easier.
Thanks!
1 post - 1 participant
I keep getting the following error with iCloud3:
Logger: homeassistant.components.device_tracker
Source: components/device_tracker/legacy.py:521
Integration: Device tracker (documentation, issues)
First occurred: 7:32:13 PM (26117 occurrences)
Last logged: 8:19:01 PM
The see service is not supported for this entity device_tracker.karin_iphone
The see service is not supported for this entity device_tracker.paul
Unfortunately, I’m too new to know what to do here.
Also, I’m getting this error in Lovelace where user is any person I have defined:
Entity not available:
script.icloud3_update_location_user
I’m guessing the script wasn’t installed?
Any pointers on this would be appreciated.
1 post - 1 participant
Hi folks,
to avoid nasty surprises, I would like to redirect the backup path of my Home Assistant installation to my NAS.
Can someone explain how to do this?
1 post - 1 participant
Hello,
I have come to explain to you my problem with Legrand.
I have 4 legrand cable outputs with netatmo for my radiators.
The cable outputs are configured in radiator mode with pilot wire on the legrand home + control app
and they work well.
I created 2 temperature schedules on the home + control app:
Comfort mode: 19 °
Eco mode: 17 °
I also have a netatmo thermostat which also works great.
In home assistant I see the netatmo thermostat (via the netatmo integration)
as well as the comfort and eco modes of my radiators.
My issue is the following :
In home assistant when I ask to switch from eco mode to comfort mode, the change is not made
not on radiators.
As soon as I launch the official home + control app from legrand without nowhere (just by launching the app)
my radiators switch to comfort mode.
as long as I do not launch the official home + control app, the mode does not change.
Do you have any idea to solve this problem?
Thank you
1 post - 1 participant
Hi everyone,
I’m configuring the energy section into HA. I have this situation right now: I have two meters, (both shelly 3em cause I have a 3 phases line for my house and 3 phases solar panels). One is outisde the inverter and it’s looking the solar panel production, the other is right before the house consumptions so it’s looking the loads. I need to define now two sensors (which makes from the same equation by the way) which are returned energy and grid consumption. I can find them in this way:
Solar production - house consumption = if positive, feed in energy (returned energy), if negative grid consumption. How can I do these kind of sensors?
Many thanks.
1 post - 1 participant
someone know why I cant use homekit card?
I installed with HACS and I added the resources, what I doing wrong?
Thanks
1 post - 1 participant
Hi folks,
One of my children is quite sensitive to smartphone addiction and to keep an eye on this I have a sensor that measures when my child’s smartphone is unlocked. I made a separate dashboard in Lovelace that shows how much time it was unlocked. Now I would like to see the use of the past 3 days in addition to the current day.
To achieve this I made additional sensors via the History Stats. Showing the current day and 1 back worked fine for me, but unfortunately not 2 and 3 days ago, it’s shows Unkown. Apparently I have not configured the start and stop properly.
Can someone help me with the correct rules?
sensor:
- platform: history_stats
name: Smartphone A Unlocked Hours Today
entity_id: binary_sensor.smartphone_a_device_locked
state: 'off'
type: time
start: '{{ now().replace(hour=0).replace(minute=0).replace(second=0) }}'
end: '{{ now() }}'
- platform: history_stats
name: Smartphone A Unlocked Hours Past One Day
entity_id: binary_sensor.smartphone_a_device_locked
state: 'off'
type: time
end: "{{ now().replace(hour=0, minute=0, second=0) }}"
duration:
hours: 24
- platform: history_stats
name: Smartphone A Unlocked Hours Past Two Days
entity_id: binary_sensor.smartphone_a_device_locked
state: 'off'
type: time
start: '{{ now().day-2 }}'
end: "{{ now().day-1 }}"
- platform: history_stats
name: Smartphone A Unlocked Hours Past Three Days
entity_id: binary_sensor.smartphone_a_device_locked
state: 'off'
type: time
start: '{{ now().day-3 }}'
end: "{{ now().day-2 }}"
Thanks in advance! 
1 post - 1 participant
I’m struggling to get ZHA installed and would appreciate help with a solution related to the output in my logs. I’m able to install zigpy-zigate==0.7.3 manually without errors???
Logger: homeassistant.util.package==>
- Unable to install package zigpy-zigate==0.7.3: ERROR: Command errored out with exit status 1: command: /srv/homeassistant/bin/python3.9 -u -c ‘import io, os, sys, setuptools, tokenize; sys.argv[0] = ‘"’"’/tmp/pip-install-zatjkqg4/rpi-gpio_cd5c52ddc9a241599ff535da92dfd515/setup.py’"’"’; file=’"’"’/tmp/pip-install-zatjkqg4/rpi-gpio_cd5c52ddc9a241599ff535da92dfd515/setup.py’"’"’;f = getattr(tokenize, ‘"’"‘open’"’"’, open)(file) if os.path.exists(file) else io.StringIO(’"’"‘from setuptools import setup; setup()’"’"’);code = f.read().replace(’"’"’\r\n’"’"’, ‘"’"’\n’"’"’);f.close();exec(compile(code, file, ‘"’"‘exec’"’"’))’ bdist_wheel -d /tmp/pip-wheel-hxskrr_r cwd: /tmp/pip-install-zatjkqg4/rpi-gpio_cd5c52ddc9a241599ff535da92dfd515/ Complete output (87 lines): running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-3.9 creating build/lib.linux-armv7l-3.9/RPi copying RPi/init.py → build/lib.linux-armv7l-3.9/RPi creating build/lib.linux-armv7l-3.9/RPi/GPIO copying RPi/GPIO/init.py → build/lib.linux-armv7l-3.9/RPi/GPIO running build_ext building ‘RPi._GPIO’ extension creating build/temp.linux-armv7l-3.9 creating build/temp.linux-armv7l-3.9/source gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/srv/homeassistant/include -I/usr/local/include/python3.9 -c source/c_gpio.c -o build/temp.linux-armv7l-3.9/source/c_gpio.o gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/srv/homeassistant/include -I/usr/local/include/python3.9 -c source/common.c -o build/temp.linux-armv7l-3.9/source/common.o gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/srv/homeassistant/include -I/usr/local/include/python3.9 -c source/constants.c -o build/temp.linux-armv7l-3.9/source/constants.o gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/srv/homeassistant/include -I/usr/local/include/python3.9 -c source/cpuinfo.c -o build/temp.linux-armv7l-3.9/source/cpuinfo.o gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/srv/homeassistant/include -I/usr/local/include/python3.9 -c source/event_gpio.c -o build/temp.linux-armv7l-3.9/source/event_gpio.o gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/srv/homeassistant/include -I/usr/local/include/python3.9 -c source/py_gpio.c -o build/temp.linux-armv7l-3.9/source/py_gpio.o source/py_gpio.c: In function ‘PyInit__GPIO’: source/py_gpio.c:1046:4: warning: ‘PyEval_ThreadsInitialized’ is deprecated [-Wdeprecated-declarations] 1046 | if (!PyEval_ThreadsInitialized()) | ^~ In file included from /usr/local/include/python3.9/Python.h:145, from source/py_gpio.c:23: /usr/local/include/python3.9/ceval.h:129:36: note: declared here 129 | Py_DEPRECATED(3.9) PyAPI_FUNC(int) PyEval_ThreadsInitialized(void); | ^~~~~~~~~~~~~~~~~~~~~~~~~ .
1 post - 1 participant