@topse wrote:

Hi,
I am trying to connect to a HMIP-BRC2-Switch from Homematic. The pymatic-Library seems to support it. The CCU2, which was installed as Container in Hassio, has recognized the Switch and tests are succesful.

I also have created “Dummy-Programms” in the CCU, as described here: Homematic Switch (HMIP-WRC2)

But the switch is not showing up in entities of Home Assistant.

I have testet with a temperature sensor from Homematic – the temperature sensor works and is available within the Home Assistant Entities, so in principle the connection between Home Assistant and Homematic seems to work.

Does anyone have a hint what to do?

Thanks and Best Regards,
Tobias

Posts: 1

Participants: 1

Read full topic

@mcpaha wrote:

Hi!

I have denon avr-2113 which is now visible at HA.

media_player:
  - platform: denonavr
    host: 192.168.1.111
    name: Denon
    show_all_sources: true
    timeout: 2
    zones:
      - zone: Zone2
        name: Sauna

I am really noob with HA and especially what comes to the automation & scripts.

What I’d like to achieve (to help my wife especially) is create automation / script which:

By pressing button:

Denon zone 2 (sauna) is powered on, input is selected CD (where is Chromecast audio (media_player.oleskelutila)). Then it is easy to push audio from phone to sauna’s speakers.

Anybody could help?

Posts: 1

Participants: 1

Read full topic

@rajan wrote:

I have a Gauge card:

entity: sensor.temperature_14
max: 40
min: -15
name: Ute
severity:
  green: 0
  red: 25
  yellow: 15
theme: Dark-Gray
type: gauge

But like to add more temperature intervals … is that possible?

Posts: 1

Participants: 1

Read full topic

@DemonAngel44 wrote:

I have a number of Sonoff T0 US 3 Channel switches installed across the hours that is running Tasmota 8.3.1.

A few of these channels are not actually connected to any lights (nothing linked on the relay) and I use these switches to control other items for example the bathroom fan, another one switches the existing kitchen light (second switch setup) and even use one to open and close my gate.

What I am stuggling with is to classify only some of the channels in a 3 channel T0 as lights. For the switches that I only use for lights, I used the tasmota SetOptions30 1 command but this seems to be an all or nothing command.

From the following image, how to I classify the lights as lights but leave the switches as is. (then they are coming from the same Sonoff T0)

LightsToMove1007×613 32.4 KB

One more thing that I found if that if I leave the Device Name field populated, homeassistant will append the device name to the switch name and you’ll end up with “Sun Room Light Kitchen Switch 2” which is a bit of a mouth full for Alexa to handle. Is there a way of populating the Device Name field but have homeassistant ignore it?

Device Name Removed371×819 18.6 KB

Any advice would be greatly appreciated.

Posts: 1

Participants: 1

Read full topic

@sebakerckhof wrote:

Hi,

I have a dashboard for each of my rooms, which only shows the stuff relevant for that room.
I also have FIND setup which tracks my position inside the house.

What I would like to do is to automatically show the dashboard for the room I’m in.
Do you know if something like this is possible? I can program something myself, so I guess all I need is a way to tell home-assistant to switch the dashboard for a certain user’s front-end.

Posts: 1

Participants: 1

Read full topic

@prankousky wrote:

Hi everybody,

I used to have influxdb set up like this

influxdb:
  host: !secret influxdb_host
  port: !secret influxdb_host
  database: !secret influxdb_database
  username: !secret influxdb_username
  password: !secret influxdb_password
  ssl: false
  verify_ssl: false
  max_retries: 3
  default_measurement: state

  include:
    entities: 
    # (...)
    domains:
    # (...)

  tags:
    instance: prod
    source: hass

This does exactly what it should for, let’s say binary_sensor / input_boolean entities. Their status changes, it gets logged. However, when I have something like sensor.temperature_printer (in this case, a DS18B20 on ESPHome), the state might change by the minute (or even 6 times per minute or so), which generates a lot of data.

Is there a way to limit this? I am looking for something in the likes of

# (...)
  include:
    entities:
      - entity: sensor.tempearature_printer
        interval: 2m # / 120s
        only_on_change: true

This is arbitrary yaml, but what I mean is: for entity sensor.temperature_printer log value every 2m; if value has not changed, don’t log it (otherwise do log it).

Prior to ESPHome, I had every single sensor integrated via zigbee2mqtt, so I could just let node-red take care of this; however, I don’t think it is the best solution to generate automations to send changes from the ESPHome entities to mqtt just so that node-red can work with them. There ought to be a better solution. Is there and I just missed it?

Thank you for your ideas

Posts: 1

Participants: 1

Read full topic

@Petengy wrote:

Following the official guide it was not possible (to me) to install tensorflow in home assistant.

Here my system conf:
Raspberry pi 4 model B – 4GB RAM – CPU Cortex A-72 – Architecture ARM
ASSOS 3.13
Home Assistant: 0110.1
Python vers. (Python3): 3.8.2
PIP3 versione: 20.1.1
Virtualenv version: 20.0.21

I was able to install the integration files and the model but tensorflow, through the pip install installation (env environment), is not successful.

The message is more or less always the same: " ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)

ERROR: No matching distribution found for tensorflow "

I followed various guides and information on the net for about 3 days but without success. I have come to the conclusion that the problem could the lack of a wheel configured for rasperry pi 4 and python 3.8.

I ask for help to confirm this, and to suggest (if I’m right) a revision of the official guide.

…or, alternatively, I ask you some help to correctly install tensorflow on my system.

I thank everyone and wish you a good HA-job.

By Pet

Posts: 1

Participants: 1

Read full topic

@Hedda wrote:

Ilya Kirov (kirovilya on GitHub) has released source code for building Z-Stack 3.0 Zigbee 3.0 firmware for Texas Instruments CC2530 based devices with support for a single relay and external sensors, currently tested for Sonoff BASICZBR3 and a DS18B20 1-wire temperature sensor.

As far as I know, this is a first as Sonoff BASICZBR3 (Zigbee version of Sonoff BASIC R3 by ITead) is based on a CC2530 Zigbee module and Texas Instruments officially only released Z-Stack Home 1.2 core for it which only support ZHA 1.2 (Zigbee Home Automation 1.2) stack.

• https://www.cnx-software.com/2020/05/25/zigbee-firmware-news-ti-z-stack-3-0-zigbee-for-cc2530-ptvo-zigbee-fw-configuration-tool/

Sonoff-BASICZBR3-TI-Z-Stack-3.0-Zigbee1280×853 207 KB

Sonoff BASICZBR3 with CC2530 Zigbee module and DS18B20 1-wire temperature sensor

You’ll find source code on GitHub (requires Texas Instruments development software to compile):

• https://github.com/diyruz/diyruz_rt

kirovilya also posted a long technical post explaining development work (written in Russian):

• https://habr.com/ru/company/iobroker/blog/495926/

Google Translate link for kirovilya’s developers write up:

• https://translate.google.com/translate?sl=ru&tl=en&u=https%3A%2F%2Fhabr.com%2Fru%2Fcompany%2Fiobroker%2Fblog%2F495926%2F

Posts: 1

Participants: 1

Read full topic

@drogfild wrote:

I was checking what has caused my DB to grow and ran queries to DB with SQLite Web addon. I ran following query to find out that top 13 of my all entries in states -table are from Huawei LTE integration.

select entity_id,count(*) from states group by entity_id order by count(*) desc limit 100;

Largest amount of records is device tracers for our tablets that are almost always at home. They have bit more than 58 000 records. I have set recorder for 7 days and purging seems to be working just fine.

It seems to log every 10s that device is home. Even if that hasn’t changed. Only thing that changes in ‘attributes’ column is associated_time.

Is there something I can do about it? Naturally I could exclude theses from recorder, but that seems to be silly solution. I was about to raise a github issue about it but opted to ask here first.

Posts: 1

Participants: 1

Read full topic

@Wes93 wrote:

Hello to everyone:
I need some help, i use this integration https://www.home-assistant.io/integrations/homekit/ and i want to exclude a series of entity that are called binary_sensor.<some number/letter>_update_available. so there is something like that:
exclude_entity:

• binary_sensor.*_update_availabe?

Thanks a lot
Stefano

Posts: 1

Participants: 1

Read full topic

@Hedda wrote:

(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged)

Posts: 1

Participants: 1

Read full topic

@jeppper wrote:

Has someone tried to get disk information like status, size etc for a Synology NAS with SEVERAL disks?
I have found the MIB with OIDs but I can´t figure out how to somehow parse information from each drive

See this https://global.download.synology.com/download/Document/Software/DeveloperGuide/Firmware/DSM/All/enu/Synology_DiskStation_MIB_Guide.pdf
Page 7

Posts: 1

Participants: 1

Read full topic

@msambol wrote:

I’ve had a long-stable HA 0.92.2 as the platform for my home automation and alarm, using Konnected. Recently I discovered a problem with konnected, and had to change the wiring between two terminals, resulting in the need to change an element name. It seems I did something wrong when changing the element name, and as a result Lovelace is unable to load. I get only:

Unknown Error
Reload Lovelace

in the log:

2020-05-25 13:45:37 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection.2943626736] Error handling message: Unknown error
Traceback (most recent call last):
  File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/websocket_api/decorators.py", line 17, in _handle_async_response
    await func(hass, connection, msg)
  File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/lovelace/__init__.py", line 178, in send_with_error_handling
    result = await func(hass, connection, msg)
  File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/lovelace/__init__.py", line 199, in websocket_lovelace_config
    return await hass.data[DOMAIN].async_load(msg['force'])
  File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/lovelace/__init__.py", line 102, in async_load
    await self._load()
  File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/components/lovelace/__init__.py", line 120, in _load
    data = await self._store.async_load()
  File "/srv/homeassistant/lib/python3.5/site-packages/homeassistant/helpers/storage.py", line 81, in async_load
    return await self._load_task
  File "/usr/lib/python3.5/asyncio/futures.py", line 382, in __iter__
    return self.result()  # May raise too.
  File "/usr/lib/python3.5/asyncio/futures.py", line 285, in result
    raise CancelledError
concurrent.futures._base.CancelledError

I found another thread with what looks like the same problem:

https://community.home-assistant.io/t/help-amateur-here-cant-access-frontend/110480

This points to “a syntax problem in my storage/core.entity_registry”. I’ve looked and can’t find anything suspicious there.

Another poster recommended removing core.entity_registry, core.device_registry and core.config_entries, which I tried. That didn’t help either.

By stripping down my groups.yaml file to bare minimum and restarting I can get HA to show me Lovelace with just the alarm panel, but then if I reload the browser it goes back to the error message.

I realize I’m way behind in upgrading but the system was stable and I didn’t want to introduce any risk. Now it seems I’m hosed. Can anyone recommend any way out of this?

Posts: 1

Participants: 1

Read full topic

@dicko wrote:

Hi

I have had the stream working for a while now but never tested the capture but now I am hoping to use the capture image.

I have a DVR and the cameras are NOT IP cameras. So whats the best command for the still_image_url: please ?

  - platform: generic
    name: Streaming Enabled
    still_image_url: http://192.168.0.20/cgi-bin/currentpic.cgi
    stream_source: rtsp://192.168.0.20:8554/user=USERNAME_password=PASSWORD_channel=1_stream=0.sdp?real_stream
    verify_ssl: false
    scan_interval: 5

Posts: 1

Participants: 1

Read full topic

@karansoi wrote:

I have pwmled working with pigpio as an automation to run the twin cooling fans on my armour case. This is my automation

- id: Update Cpu Temperature
  alias: Time to Start Cpu Cooling
  trigger:
    platform: numeric_state
    entity_id: sensor.cpu_temperature
    above: 50
  action:
    service: light.turn_on
    entity_id: light.pwm_cooling_fan
    data_template:
      brightness_pct: '{{ states(''sensor.cpu_temperature'') }}'
- id: Update Cooling
  alias: Time to Stop Cpu Cooling
  trigger:
    platform: numeric_state
    entity_id: sensor.cpu_temperature
    below: 47
  action:
    service: light.turn_off
    entity_id: light.pwm_cooling_fan

I notice that the entity PWM Cooling Fan does not follow the cpu temp as desired by way of the data template.

Can this be improved by making it a closed loop control?

Posts: 1

Participants: 1

Read full topic

@ecologicalSlinky wrote:

I’m new to HA and still learning. I have the Aeotec Z-Stick Gen5 with a raspberry pi 4 (connected to a 4 port USB 2 Sabrent hub). I have setup a single switch from my prior z-wave network (excluded from other network, included in HA through the panel). That works, for a short period of time (sometimes as much as 45 minutes). I am using Raspbian with a “Home Assistant Core on Docker” setup.

I’ve experienced (and read) about the persistent name issues with this stick, so I have setup to use (/dev/serial/by-id/usb-0658_0200-if00) which does work. In my docker-compose, I was mapping just the USB device itself, but then changed to expose all (- /dev:/dev) for testing.

My problem, though, seems that the setup stops working when the dev name changes (like from ACM0 to ACM1). I’m not sure why it would have changed (no power loss, using a stock raspberry pi USB-C power source). My guess would be that when the device changes from ACM0 to ACM1, my session to the original device is no longer valid (even though I reference it by-id). Is that possible? Do I have something screwed up in my rpi4 that might cause it to re-detect the devices?

Any help or suggestions would be greatly appreciated. I’ve done lots of searching, but it seems most people have success using the by-id persistent name.

For reference, my zwave log ends up with:
2020-05-25 07:10:32.350 Info, Node002, Sending (Send) message (Callback ID=0x17, Expected Reply=0x04) - SwitchMultilevelCmd_Get (Node=2): 0x01, 0x09, 0x00, 0x13, 0x02, 0x02, 0x26, 0x02, 0x25, 0x17, 0xf3
2020-05-25 07:10:33.350 Error, Node002, ERROR: Dropping command, expected response not received after 1 attempt(s)
2020-05-25 07:10:33.350 Detail, Node002, Removing current message
2020-05-25 07:10:33.350 Detail, Node002, Notification: Notification - TimeOut

Posts: 1

Participants: 1

Read full topic

@quentinsf wrote:

I’m delighted to see that scripts can take parameters using the ‘fields’ clause. Each parameter can be given a description and an example value.

It would be very nice to set defaults for the parameter values there, too, I think. At present you can handle defaults to some degree with a Jinja filter. Here’s my little trial script:

parameter_test:
  alias: Parameter test
  fields:
    number:
      description: The number to go in the message
      example: 123

  sequence:
    - service: notify.mobile_app_my_iphone
      data_template:
        title: "Life, the Universe and Everything"
        message: "The answer is {{ number|default('42') }}"

But if you use the parameter in multiple places, you get duplication, and I think it would be tidier anyway to be able to do this:

  fields:
    number:
      description: The number to go in the message
      example: 123
      default: 42

Should I dig in and see if I can implement this? Is there a better solution?

Posts: 1

Participants: 1

Read full topic

@quentinsf wrote:

In scripts, you can add tests for conditions. If the condition fails, the script stops. But I think that’s the only kind of condition test allowed?

I was wondering how easy it would be to allow individual items in a script sequence to have a condition added? Ansible scripts do this with a ‘when’ clause – in HA I guess this might look like:

script:
  example_script:
    sequence:
      - service: do_something

      - service: light.turn_on
        data:
          entity_id: light.ceiling
        when: "{{ sensor.room_brightness < 128 }}"

      - service: do_something_else

I haven’t looked at the code – it may be that this would be tricky for some reason – but it does feel as if the current condition tests are a bit limited.

Posts: 1

Participants: 1

Read full topic

@MarvinE wrote:

Hi all,

I have some picture elements cards that show an overview of my home (downstairs, upstairs) which shows the lights, temp and who’s home or not. For example the following piece of code:

- entity: light.kitchen_spot_3
          type: state-icon
          icon: mdi:lightbulb
          style:
           left: 5%
           top: 28%
           --iron-icon-height: 20px
           --iron-icon-width: 20px

Previously the --iron-icon-height, was working perfectly and all my icons were the correct size as I wanted them to be. Since updating to 0.110.1/2 the icons are all their standard size unfortunately. So some icons are way too big, while others are way too small compared to before updating. Does anyone have any idea why this is happening?

Thanks!

Posts: 1

Participants: 1

Read full topic

@Konrad162 wrote:

Hello,
I saw a lot of topics but none of them was very up to date and didn’t fully explain if this is possible or not. And if it is possible then how to do it.

I have Plex media server plugin installed and I would like to mount external USB HDD. How to achieve this in HassOS?

I have tried to call fdisk -l to list all the disk but it doesn’t bring any results

Hardware page looks like that:

image569×688 11.1 KB

…

Please, help.

Posts: 1

Participants: 1

Read full topic