@Yep wrote:
Hello fellow Home Assistant users !
I bought a Fibaro FGBS222 Smart Implant to be able to control my garage door from my phone. Basically, there’s a wall control unit where I wanted to put the Smart Implant, but I can’t get it to work…
The garage door system is a Sommer Pro+, and here’s a wiring diagram of what I did.
I was able to add the Smart Implant to home assistant, so that means the unit is correctly powered on, but I’m not quite sure about the wiring with the input and output. Without the Smart Implant, if I make cables C1 and C2 touch for about 1 second, the garage door opens or closes (depending on its current position). I was counting on the Smart Implant to act as I did manually, ie I need the Smart Implant to make both cables “touch” for a very short time.
I thought I did everything right, but first thing that seemed strange to me is when I modified the parameter 156 - Output 1 - auto off to 5 (which I believe gives a value of 0.5 seconds, which should be sufficient), but when I disconnected the Smart Implant (to try various things), when I got back to the Node configuration options in Home Assistant, the value seemed to go back to 0.
Then, I went to Developer Tools --> Services and tried to call the service “switch.turn_on” on the entity switch.fibaro_system_fgbs222_smart_implant_switch, but nothing happened.
Am I missing something here ? Is it the wiring that’s bad, the way I added/configured the Smart Implant, or is there something else going on ?
Does anyone have any idea on how I can begin to troubleshoot the whole thing ? I’m a bit of a beginner with Z-Wave, because I never really had problems before, the Z-Wave devices I have all work perfectly…
Thanks in advance for your help !
Posts: 1
Participants: 1