Season sensor report wrong season
@andlo wrote: My season sensor reports that is is autumn, but only few days until christmas and living in Denmark, it defently should be winter at the moment. But how to get the sensor to report...
View ArticleHow connect arduino mega with Home Assistant?
@Andrewa wrote: Hi guys, i’m new here, i have create in my home a domotic project using arduino mega 2560 connect with lan and about 40 sensor, relays. Now i use blynk but i would use Home Assistant....
View ArticleProbable solution for those having issues with Apple TV (tvOS 13) with HA on...
@JayF wrote: Hey guys! Yesterday I’ve been struck by an idea of what would be the probable solution and it turns out it worked for me. I’m running Home-Assistant on Docker from within an Intel NUC....
View ArticleSatel Integra configuration with HA
@Tonita wrote: Hey guys… I have a Satel Integra with ETHM-1 Plus. I would like to make Home Assistant work to use Alexa and Siri to turn the lights on and off (also programming various events now,...
View ArticleLovelace card to display pending tasks
@hjbotha wrote: I’ve set up a tablet to act as a dashboard, and I’d like to add a card to it highlighting any issues which we might need to take care of. For example, remote batteries getting low. My...
View ArticleCorrect status of relay script
@gromar wrote: Hello all, I’ve got a RF433Mhz device - EV1527 which is a relay that turns on/off lamps in my house (it’s showed in HA as light.rfcustom_524643_0 in my case). I also have a PZEM004...
View ArticleRhasspy + Logitech Media Server: Conflict?
@infiniteloop wrote: Setting a new Raspberry 3 to host Rhasspy and LMS bring me to a strange issue: First attempt Starting with a clean Raspbian image, I’ve installed Rhasspy as per instruction and it...
View ArticleRhasspy TTS Options & Open Source WaveNet
@fishertimj wrote: This is my first post about Rhasspy, having just jumped down the offline voice assistant rabbit hole. I’m only an hour or two in (installed Rhasspy on my NUC via Docker, reading a...
View ArticleMyQ Status Delay
@jjdegeo wrote: I’ve noticed after the latest MyQ fix that the cover state no longer changes to opening. As a result when you press the open button you receive no indication that the command was...
View ArticleCustom:layout-card help
@jamesking wrote: Hi, I have a view with 3 thermostat cards, A B and C. On my phone they show in a vertical stack. A B C on my laptop they show as 2 devices on the top row, then 1 underneath: A C B I...
View ArticleClik here to view.
Z-Wave TRV Climate entity gone
@typhoon2099 wrote: I understand that some changes have occurred to climate entities in the 103 release. Unfortunately one of the changes seems to have been to remove the climate entity from my Devolo...
View ArticleClik here to view.
DNSMASQ Problem
@Henrik1986 wrote: HI! My router dosen’t support nat loopback and i’m trying to setup dnsmasq so i can navigate to my duckdns.org when I’m home. The problem is that I can’t get it to work. This is my...
View ArticleGarbage sensor from API json help
@jkkarlberg wrote: Ok, so I’m trying to make a sensor that shows the type of garbage and the time it will be collected. The code below I get from a curl or rest sensor But it seems that I can’t make...
View ArticleHow to Automate turning off lights with conditions?
@Daniel-san wrote: Hi Guys, I created a few automations to automatically turn off the lights after X amount of time. So far… they “work” but after living with these for a few days, I’ve noticed that...
View Article--- Article Removed ---
*** *** *** RSSing Note: Article removed by member request. *** ***
View ArticleTrouble pairing Ikea TRÅDFRI Wireless control outlet
@telecomguy wrote: Yesterday I bought an Ikea TRÅDFRI Wireless control outlet to be able to pair with Home Assistant so I could use it to turn my Christmas tree lights on/off. I run HA in a docker...
View ArticleTemplate works in editor, not in config
@liksvette wrote: I am stumped. Can anyone please tell me whats wrong with the value template below? - platform: template sensors: garage_humidity_difference: value_template: '{{...
View ArticleClik here to view.
Fibaro FGBS-222 to control a garage door not working
@Yep wrote: Hello fellow Home Assistant users ! I bought a Fibaro FGBS222 Smart Implant to be able to control my garage door from my phone. Basically, there’s a wall control unit where I wanted to put...
View ArticleHelp Needed - Zigbee2MQTT keeps resetting USB
@Niall wrote: Hello, On Friday morning I woke up and my lights did not turn on as I moved around the house. Upon further digging I found that my zigbee2mqtt add-on was not working. I have HA (0.103.0)...
View ArticleClik here to view.
Notification when someone comes home or leaves
@war1000 wrote: I am really hoping someone can help me with this as this seems to be pretty common. I am trying to setup a notification with presence. I have setup the presence through my asus router....
View Article