Hello. I’m yet another Insteon user New to HA. I have a Hub 2242-222 rev 2.1. Based on the label on the bottom of the hub, there is no username/password so I assume pre-2014. However, I can access via browser on port 25105 - see image
I have a fairly simple Insteon environment with the one hub and about 10 switches/dimmers and a few lamp modules. I don’t really have any scenes. I just use some schedules (timed, not sunrise/sunset) to turn on/off devices. The schedules are still working but times need to be adjusted (should have use rise/set). It would really not be a big problem to have to relink my switches to the hub if needed.
My issue in setting up HA is in the authentication. I have done a NETWORK reset, but trying every version of admin/INSTEON ID I can it fails to authenticate. I have tried adding hub v1 and hub v2 to HA, switching ports between 25105 and 9761 on both. I tried using my hub browser connection (not HA) to change the user/password. I have not yet done a factory reset.
Any help from the community is appreciated.
1 post - 1 participant