Legrand switch only showing battery status

@Jmi wrote:

Hello,

I’ve integrated Legrand switches (067723) and I they provide only battery status.
I’ve tried with both zha/zigate and with a combee 2.

When I push on/off buttons messages are seen, which is a good thing, but it’s like the device isn’t map correctly.

Help, suggestions are welcomed !

Capture d’écran 2020-04-18 à 13.08.221134×665 56.6 KB

[0x329c:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=True> manufacturer=None tsn=0 command_id=0>
[0x329c:1:0x0006] ZCL request 0x0000: []
[0x329c:1:0x0006] No handler for cluster command 0
[0x329c:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=CLUSTER_COMMAND manufacturer_specific=False is_reply=False disable_default_response=True> manufacturer=None tsn=2 command_id=1>
[0x329c:1:0x0006] ZCL request 0x0001: []
[0x329c:1:0x0006] No handler for cluster command 1

Posts: 1

Participants: 1

Read full topic