@hiddedb wrote:
Hi Guys! I hope I’m asking this in the right place (100% new to HA and having an issue getting it to work!).
I installed HA on my Pi 3, I’m using a Raspberian OS because I also wanted to flash my tuya lightbulbs.
I’m setting up the Mosquito MQTT, I’ve downloaded it from the add-on store on my home assistant, but it says it’s not starting (dot stays red).
However, when I run systemctl status mosquitto.service on the raspberry Pi it says it’s running.
it’s not creating any logs either. I don’t have the configuration option for the MQTT too.
Does anybody have an idea what I could try?Thank you in advance guys! Really hope I can figure this out, bit of a linux noob so ye…
This is my status log when I run the systemctl:
● mosquitto.service - Mosquitto MQTT v3.1/v3.1.1 Broker Loaded: loaded (/lib/systemd/system/mosquitto.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2019-11-20 18:29:19 GMT; 22min ago Docs: man:mosquitto.conf(5) man:mosquitto(8) Main PID: 560 (mosquitto) Tasks: 1 (limit: 2200) Memory: 1.7M CGroup: /system.slice/mosquitto.service └─560 /usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf
Posts: 9
Participants: 4