Controlling a dumb RF Remote via RTL_433

Hello,

I am trying to control some RF outlets that are normally controlled via an included RF remote over RTL_433. I have MQTT configured (outside of HA), and RTL_433 installed as an add-on.

Both are configured and all is communicating. I’m new to both MQTT and RTL_433.

My SDR dongle is picking up the button presses from the remote.
For reference, this is the device in question, bought nearly a decade ago.

I can confirm that the data from the remote is picked up by RTL_433 and published into MQTT. Below is the data from pressing the 6 different buttons.

[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
[rtl_433] 
[rtl_433] time      : 2024-12-18T20:31:49.631660-0600
[rtl_433] model     : Smoke-GS558
[rtl_433] id        : 21933
[rtl_433] unit      : 26
[rtl_433] learn     : 0
[rtl_433] Raw Code  : 6ab5ba
[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
[rtl_433] 
[rtl_433] time      : 2024-12-18T20:31:50.670096-0600
[rtl_433] model     : Smoke-GS558
[rtl_433] id        : 21933
[rtl_433] unit      : 26
[rtl_433] learn     : 0
[rtl_433] Raw Code  : 8ab5ba
[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
[rtl_433] 
[rtl_433] time      : 2024-12-18T20:31:54.571171-0600
[rtl_433] model     : Smoke-GS558
[rtl_433] id        : 21933
[rtl_433] unit      : 26
[rtl_433] learn     : 0
[rtl_433] Raw Code  : 9ab5ba
[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
[rtl_433] 
[rtl_433] time      : 2024-12-18T20:31:55.475559-0600
[rtl_433] model     : Smoke-GS558
[rtl_433] id        : 21933
[rtl_433] unit      : 26
[rtl_433] learn     : 0
[rtl_433] Raw Code  : 4ab5ba
[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
[rtl_433] 
[rtl_433] time      : 2024-12-18T20:31:57.526438-0600
[rtl_433] model     : Smoke-GS558
[rtl_433] id        : 21933
[rtl_433] unit      : 26
[rtl_433] learn     : 0
[rtl_433] Raw Code  : 1ab5ba
[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
[rtl_433] 
[rtl_433] time      : 2024-12-18T20:31:58.346103-0600
[rtl_433] model     : Smoke-GS558
[rtl_433] id        : 21933
[rtl_433] unit      : 26
[rtl_433] learn     : 0
[rtl_433] Raw Code  : 2ab5ba
[rtl_433] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

Is there a way I can integrate this and control the device via RTL_433/MQTT?

2 posts - 2 participants

Read full topic