Changed from Z-wave JS to Z-wave Ui and now I’m stuck
Hey everybody, Got myself stuck once again in my HA Z-wave config. Noobish as I can be, it was only today that I realized there is a Z-wave JS addon besides the Z-wave integration. I was doing all the...
View ArticleError during setup of component hassio
The hassio component does not start. I can’t open “Add-ons” in the settings menu etc. I tried to update the node-red library “node-red-contrib-home-assistant-websocket” from 0.73 to 0.74.2, which was...
View ArticleHA loses connection to IKEA devices every other day
Hello all, I’m facing a problem with my HomeAssistant setup that I can not solve. Home Assistant hardware setup: Running on a Raspberry Pi 4, 4GB HA Core2024.12.4 / Supervisor2024.12.0 / Operating...
View ArticleClik here to view.
Service/action to turn off light invoked but not referenced
When I open the main gate or one of the garage doors, a yard light gets turned on. When it’s turned on, a timer is started. When the light is turned off, the timer gets cancelled, otherwise the timer...
View ArticleClik here to view.
Connection to zigbee motion detector no longer possible?
Hello, I have a Homeassitant with CC2531 gateway via which I connect my devices. The system ran for about 3 days and then stopped working. The participant a Phillips and an Ikea motion detector are no...
View ArticleCommand Line Sensor not doing anything
I’m trying to create a sensor to let me know if a service is running on a remote linux machine. I have the command sorted, I’ve tested it in Terminal and it returns the expected “running” However when...
View ArticleFrigate get both motion and person in automation
I’m trying to integrate Frigate with Alarmo. In particular I want to create an automation in which if a camera detects movement and detects a person, if the alarm (Alarmo) is active it sends me an...
View ArticleTemplate an entity from arrays
I’m looking for some help with some complex templating. My Solar Inverter has “time of use” support, which uses periods of time to determine how much energy to import/export from the grid. Integration...
View ArticleHA as network bridge
Hello. I use HA to control Siemens Logo. I have no possibility to connect it to my network by wire so I use a router as wireless bridge for Logo. I can place HA device next to Logo as it already has...
View ArticleClik here to view.
HA, MQTT and Message Date Timestamp
I have a D1 mini setup with just a battery voltage reading off A0 with a resistor inline and a NO magnetic reed switch which will be a simple mailbox alert. I have MQTT sending two messages, one with...
View ArticleMysa Thermostat Controller stuck in Farenheit
I am using the HomeKit integration to manage my Mysa Thermostats. I can change the units on the device from F to C, however this does not have any effect on the Controller, which is stuck in F. I’ve...
View ArticleClik here to view.
Create a power meter
Hi to all, guys please advice how to create an power meter of used power from my inverter. I have an inverter with 300Ah battery and SOC is not transfered to HA so I don’t understand how many is used...
View ArticleMake a 'conditional sensor'
Hi folks. Going well beyond comfort zone here, which is fun. Bear with me. I’d like to create a sensor to mirror a second sensor, and have it enabled or disabled based on the state of a third sensor....
View ArticleBackups stopped going to network storage
I had samba setup on another computer and had the share setup as a backup network storage in HA. Every time I would do a backup, it would save to my remote network storage. Everything was working fine...
View ArticleTrigger a script every half hour if a state remains unchanged
I have written a couple of scripts that send a complex sequence of IR signals from my blaster to an old dumb tv. The reason I need them is twofold When the TV is switched from its Chromecast input to...
View ArticleGosund UP111 stopped working with LocalTuya
I had a problem with a Gosund UP111 wifi socket appearing twice in HA and causing intermittent problems with automations. It was in both the Tuya cloud and Local Tuya integrations. I deleted it from...
View ArticleTemplated purifier from MQTT
I’m using govee2mqtt and I’ve got my purifier setup. I want to turn this into an actual fan/purifier in Home Assistant so I can finally link it with HomeKit (with proper speed control). I think the...
View ArticleControlling a dumb RF Remote via RTL_433
Hello, I am trying to control some RF outlets that are normally controlled via an included RF remote over RTL_433. I have MQTT configured (outside of HA), and RTL_433 installed as an add-on. Both are...
View ArticleCannot update Home Assistant Core. Error updating Home Assistant Core:...
I cannot update Home Assistant Core. When I try to update I get: Error updating Home Assistant Core: ‘HomeAssistantCore.update’ blocked from execution, system is not healthy - setup I did not install...
View ArticleClik here to view.
Template Sensors showing as Unavailable
Something weird is going on. I have a variety of template sensors in my yaml configuration file, the values for which are calculated from other source sensors. They have all been working just fine for...
View Article