Sensor does not change state
@EricR wrote: I created a simple sensor to identify if the temperature is going to be warmer or cooler using darksky. It returned “warmer” but does not change to “cooler”. No errors in the logs. It’s...
View ArticleClik here to view.
Light card for MQTT
@willh wrote: The dimmer slider for MQTT lights behaves differently than my z-wave light dimmers. When the slider is moved all the way to the left, the zwave dimmers will remain on (the toggle in the...
View ArticleClik here to view.
ESP8266 + Google Home commands + Garage Door
@SimonPth wrote: Hi all I started off with a Wyze Sense pack, intending to have a bit of a play with just that and the corresponding app. In walks Home Assistant and I have fallen very deep down a...
View ArticleAmcrest testers wanted: more responsive motion detection
@pnbruckner wrote: The current implementation for motion detection uses polling. Every 5 seconds it checks to see if a motion detection event has happened. Obviously this can cause up to 5 seconds of...
View ArticleAutomation help with location attributes
@lazza wrote: I have a automation created in the front end that i feel should work but it doesn’t and wondering if anyone can assist. I live in a RV/caravan so my location changes all the time as i...
View ArticleSetup failed for mqtt: Integration failed to initialize
@DessertBesom wrote: Hi, I try to setup mqtt, but it does not work. I tested with several variants (host networking, bridge, external ip, localhost, container ip) but ha is not able to talk with mqtt....
View ArticleClik here to view.
Timed automation with presense detection not triggering
@myxor wrote: Hello community, this is my first post here so please be kind to me I configured an automation which should turn on the kitchen light in the morning if at least one of two devices are at...
View ArticleAutomation trigger group not the same as listing the entities
@Van wrote: Hi all, I not sure how to get the trigger to use group similar to how you would list each entity. for example: - alias: test trigger: - platform: state entity_id:...
View ArticleKNX Slow bus response
@D3nnisd wrote: Hi, Until recently, KNX on Home-assistant with HASSOS on a RPI 3b+ has been a blessing. Fast and reliable. However, since a few weeks it seems to be slow responding. If i turn on or...
View ArticleNo camera entitity with with new G3 Flex
@ibstyln wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Existing device detected again
@HemiBob wrote: How can I stop getting notifications that a new device has been found when it’s not new and has been working fine for weeks? If I dismiss the notification, it comes right back on the...
View ArticleClik here to view.
MQTT setup in Hassio
@Fredrik_Jacobsson wrote: I try to set up MQTT, Mosquitto broker addon in Hassio. But I can’t get it to work, can somebody give me a hand. image497×851 24.4 KB And I have created following user for...
View ArticleClik here to view.
Logger and HACS
@lseufer wrote: Hi, Stupid question, but is there a way to disable the warning logs saying “You are using a custom integration for…”? I am aware I am using custom components, I installed them. Thanks....
View ArticleAfter upgrade to 0.104.3 no UI
@Ener-G wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleRecursive snapshot_entities
@zhulik wrote: Hello! I’m trying to builda script that saves and then restores states of my lights, there is a very useful feature in the scene.create service called snapshot_entities, but it seems...
View ArticleDo something when sensor.lastchanged to long ago
@hajo62 wrote: I have some sensors from xiaomi, which are not very reliable. The Pi looses the connection to my Xiaomi bluetooth temperature sensors every now and than. Only a Pi reboot does a...
View ArticleHaving issues with proximity
@ibstyln wrote: Users status never changes and don’t show up on map. The icons for the zones appear on the map but not the device tracker(s). User status always states away even though I work from...
View ArticleDeconz_event automation to dim all 'on' lights
@nicktheguitar wrote: I’m building the automations to use tradfri 5 button remotes as light switches for my kids, using the Deconz Conbee2 stick. I’ve got the one below to work dimming one light, but...
View ArticleClik here to view.
OZW blocked during starting up without error
@letohicy wrote: Hi everybody, A couple of hours since I’m stuck in setting z-wave. I’ve read more then once the documentation and several topics here, but without any success. So, my turn to ask for...
View ArticleSwitch always appearing "off" - is this possible?
@NicolasG wrote: Hey there, I have a specific switch which is just a power toggle button for a device, so I don’t want the switch to be appear “on” when I press it, it should always think that I...
View Article