Clik here to view.
Automation UI - Offset
@daxm wrote: What’s the unit of the offset in the gui in automation? Posts: 2 Participants: 2 Read full topic
View ArticleUnable to activate ZigBee and Z-Wave
@thuva wrote: I have hassio running on Pi4. I have Z-Wave dongle and it was working well on USB 2.0. ( Z-Wave.Me USB Stick incl. Z-Way Controller Softw - Z-Wave Plus). Then I bought Wireless Zigbee...
View ArticleClik here to view.
Can't integrate NodeMcu sensors manually in configuration.yaml
@shehroz96 wrote: Hi, I’m trying to connect sensors from NodeMCU to Home Assistant using MQTT broker. Through serial communication, I sent the values to CloudMQTT and then tried to integrate with Home...
View ArticleClik here to view.
Configuration->Devices->Entities Card slider switch, what is it for?
@u8915055 wrote: Hello there, I am using Hassbian version 0.104.2 and had a question about something I saw. If I click on the configuration panel and then ‘Devices’ which lists all my discovered...
View ArticleGoogle TTS problem
@aphesiia wrote: Hi guys, I am a newbie in Hassio. I have a little problem with my TTS. In my configuration.yaml I put tts: platform: google_translate cache: true cache_dir: /tmp/tts time_memory: 300...
View ArticleTemplate Platform
@PPee wrote: Hi All, Please help me get started with the following. I’m trying to get some information of my central heating system, like boiler temperature, boiler on or not, target temperature, etc,...
View ArticleClik here to view.
Constant Connection Lost notifications
@Mariusthvdb wrote: as of late, (think it started on 104.x) there’s a very frequent Connection Lost notification sliding up the window. While my config in rest is near perfect …: 491126×538 73.6 KB...
View ArticleIKEA remote magically toggles Xiaomi switch without being linked anywhere
@Vincent1468 wrote: Hello everyone, I’m having a strange issue with three Zigbee devices. Two IKEA TRADFRI remotes (E1524/E1810) and a Xiaomi Aqara single key wall switch (QBKG11LM). Whenever I press...
View ArticleIs it possible to delete unused devices?
@mouthpiec wrote: Is it possible to delete unused devices? When I go to Devices and press Delete on the device, it is still present (although without details) Posts: 1 Participants: 1 Read full topic
View ArticleSeveral Errors with Sensors in configurator.yaml
@joachi wrote: first time i set up Hass.io on a raspberry pie 4, and everything went great… i thought. then i saw the logs… and they are filled with Error executing query: (sqlite3.DatabaseError)...
View ArticleAfter WIFI setup with static IP, no connecltion without LAN cable
@antaljani wrote: I just setup a completely new RPI3+ HassOS instance. Only SSH & Web terminal add-on was installed. After boot up, I can connect perfectly via LAN cable. After setup WIFI...
View ArticleVery slow "check configuration" and restart of Hassio
@a94marbo wrote: I have a PI3B+ with 16GB U1 sd-card, and after some releases ago check configuration and restart of Hassio became very very slow. Check config can take up to 5-10 minutes and restart...
View ArticleNode-Red State-Topic
@MDLefevere wrote: Hi all, I’m folliwing a guide to get rid of the latency in my Hue Motion sensor when using it with MQTT I was following a tutorial of Skylar Tech but I’m stuck at some point. -...
View ArticleAmazon Alexa app fails to discover devices using Emulated_Hue integration
@123 wrote: Perhaps I’ve missed some important concept because I thought it would be a cakewalk to setup the Emulated Hue integration. Nevertheless, despite all my efforts, attempts to discover new...
View ArticleSpeed fine adjust: HomeSeer HS-FC200+ Z-Wave Smart Fan Switch Controller
@mtnaut3 wrote: I read somewhere (which I cannot find again), that the new HS fan controller, which has 4 speed selections, can be fine adjusted for each of the 4 speed settings. That would be nice,...
View ArticleClik here to view.
DM_WF_MDV4 Esphome Config
@Dino wrote: Good night, I’m trying to set up the glow control of these dimmer with ESPHOME, but I’m not successful, the same way was in TASMOTA. I tried several settings of minimum and maximum glow...
View ArticleDifferences between SD install and Generix Linux
@sd_dracula wrote: Currently I have hassio installed on a pi4 with an image on the SD card but I am looking to go via the SSD version (still on the pi4) where I just use the SD card to boot from it...
View ArticleSensors - how to change number display style/precision "on the fly"?
@pejotigrek wrote: in case of my topic wasn’t too clear, here’s the explaination of my question: I’ve got a sensor that reads from the water meter. let’s call it sensor.water_read. it is numeric and...
View ArticleClik here to view.
How to survive without the "ALL groups"
@BrianHanifin wrote: I have noticed there is some concern about how to get along without the formerly automatically generated groups like group.all_lights. I promise you there is a way to make your...
View ArticleNewbie trying to understand YAML
@mboarman wrote: Coming over from Hubitat and trying to wrap my head around this universe. I’m running Hass.io and trying to transfer over some of my Hubitat automations one at a time…For the most...
View Article