Light group in groups.yaml does not appear in lovelace
@Eknem wrote: Hi there. I had A few light groups in the configuration.yaml - platform: group name: Keuken lichten entities: - light.tradfri_keuken_plafond_1 - light.tradfri_keuken_plafond_2 -...
View ArticleZigbee2mqtt paired device removal
@Chunkey wrote: Good morning, I am very new to Home Assistant so please go gentle with me. I have recently installed HA on my Raspberry Pi and I have managed to get zigbee2mqtt working and...
View ArticleOsram Smart+ Flex ledstrip
@Thuurke wrote: Hello, I have a Osram Smart+ flex ledstirip. I also have hue bridge, ikea bridge and deconz. They don’t recognize the ledstrip. Is there a way I get it working? Posts: 2 Participants:...
View ArticleAEON labs - Nano shutter new Firmware to handle blinds position
@marine wrote: Hi, A few months ago I bought a Nano shutter from Aeotec which is able to control the roller blinds. The intermediate positioning was not possible with the firmware at that time....
View ArticlePicture card to show larger image in dialog on tap
@stuart-i-m-smith wrote: Hi, Been playing around with HA for a while now, and have most things setup. One thing that has been bugging me is showing snapshots on my LoveLace UI. While they show fine in...
View ArticleHassio Virtual Box Backups
@atechnical wrote: I have my hassio running on a virtual box ,virtual machine and recently lost 2 months of work. What is the best way to back up my home assistant? Do I need to take hassio snapshots...
View ArticleClik here to view.
Binary sensor false trigger
@DenisO wrote: Got strange automation behaviour I have a “GSM modem” project. Simple SIM800l connected to ESM12 and powered by 18650 battery, which is charging if USB connected to charging board I...
View ArticleOne script but different action each time?
@NicolasG wrote: Hey there, is there a way to write a script that, when executed, is a different one each time, but goes back to the first action after the third time it ran? I never was good at...
View ArticleNo values of the KNX bus after HA restart
@MichaelR wrote: Hi there, I have the problem that after a restart of the HA the KNX bus is not read out and thus e.g. Values of a binary input or heating actuator are no longer available in HA. If I...
View ArticleNeed help tracking down Login Error
@sleeepy2 wrote: My log is filled with this and I am not sure where to track down what is causing this. 2020-02-03 16:38:59 WARNING (MainThread) [homeassistant.components.http.ban] Login attempt or...
View ArticleCCTV feed pushed to Chromecast - Suggestions
@nmparmar wrote: I have a DVR with a number of cameras. It’s both onvif and RTSP capable. I have home assistant and Google Assistant ( though not integrated). I want to be able to pull up the video...
View ArticleOther way to automatically signal for custom-cards updates than HACS?
@Mariusthvdb wrote: right now I am periodically running over my resource list to check if any of the cards has been updated. Of course, next to following several topics here, where some of the authors...
View ArticleClik here to view.
KNX Cover / Thermostat Homekit Integration
@JoaoM wrote: Hello, I’m trying to config a KNX Cover and a KNX Thermostat in Homekit, but without success. Maybe because homekit uses "set_cover_position" and knx uses "position_address". Is it...
View ArticleHelp with automation templating
@pollinolas wrote: Hi, right now I have 4 different automations for 4 different cameras, one of them would be like this: - id: 'Foto Movimiento Bajo' alias: Foto Movimiento Bajo initial_state: true...
View ArticleBroadlink rm 3 mini works ok only once
@JoseLuis wrote: I am unable to connect to my Broadlink RM Mini3 to hassio. I get the following error when I call the broadlink.learn or send services. 2020-02-03 20:55:57 ERROR (SyncWorker_11)...
View ArticleLogin attempt or request with invalid authentication (tileboard)
@danmarotta5 wrote: I’m currently running 104.1, I receive these login attempts from four iPads when run tileboard … not all the iPads generate the error message and the messages come and go (restarts...
View ArticleBroadcast 2 different messages to google-mini, What's wrong with this...
@Foz-man wrote: I’d like my google-mini to broadcast two messages, 10 seconds apart when my door sensor is open. It works to broadcast the first message, but then nothing. Action seems to stop after...
View ArticleSeparate sensor files not including?
@mmiller7 wrote: I’m trying to organize my files but for some reason the include directory isn’t working for sensors. I’ve already done this with automations, and it works great:...
View ArticlePerson component only take one device tracker
@Thib5 wrote: Hi, I try to setup person component. so I gave my person 2 devices (that I’m 100% sure they are working since I’m using it in other automation, I see them in known_devices.yaml etc…) but...
View ArticleColor values for lights using variables
@haabe wrote: So… Setting rgb_color using variables in data_template apparently doesn’t work because data_template variables are treated as strings, and rgb_color needs a list of integers. I’ve seen...
View Article