WakeOnLan YAML configuration - cannot add switch to dashboard
Hi! I’m a newbie to the YAML config, and I wanted to get some help regarding adding a WoL switch. I read up this guide, and with its help I wrote up this script: # Wake on Lan wake_on_lan: switch: -...
View ArticleZigbee device needs to be added again after power cut
Hello there! I have several BTicino product connected to Home Assistant (shutter controls K4027C and light switches K4003C). They are recognized via ZigBee Coordinator deCONZ on a raspberry pi. The...
View ArticleUse Bticino Living Now DIN power in energy dashboard
I have a Bticino Living Now DIN power meter configured with Home Assistant via Zigbee2MQTT. It works fine but I can’t set use it in energy dashboard because it has a wrong states according to this...
View ArticleDecimal to Hex?
Hi, I have a device that I can pull data from using a local API. There is one problem: I uses HEX values. So for example: 0D0807E7 = 13.08.2023 (Aug. 13th 2023). If I want to pull the data from the...
View ArticleLCN with Output-Shutters
I didn’t find anything about it in the search, so new here. If you integrate shutters at the outputs in the LCN, HA sends a timer command with 8 seconds. But that doesn’t work if you have configured...
View ArticleTemplate help show colors sensor value versus another sensor value
Hi, can someone help please with the following template. I’m trying to give colors to the certain value versus status2. if status1 is below status2 with a value between 0 and -250, a color must show,...
View ArticleWhich kind of code to use
Hello, I’m using this part of code inside a card: custom_fields: battery: | [[[ if (states["sensor.m2007j22g_battery_state"].state == "charging") return `<ha-icon icon="mdi:battery-charging"...
View ArticleUtility mete cycles
I want to use the utility meter with my Daily Rain rare of my WS2900 wheaterstation. I see posible cycles of day, week, mont and year. Does annyone know the posibility of more the one day? Two or...
View ArticleAutomation for delayed turn on - How to show when it will be on
I have an automation that will turn on my sauna based on a delay that I set on a Lovelace card. In this card I also have a duration (i.e.: for 2 hours). I also have a conditional card that only shows...
View ArticleBackup zwave 7 stick not working in zwave js ui
I do have some troubles with the the aeotec zwave stick 7. I do have 2 of those sticks, one normaly used, another one as backup in case the first one breaks down. I made a nvm backup with the...
View ArticleClik here to view.
ESP32 S3 Box 3: Why is this so difficult?!
I’m not sure I’ve done any project in HA that has created more teeth gritting than getting this box to work! I’m working on getting voice assistant cranking. I’ve made lots of progress, even getting...
View ArticleFully Kiosk App Problem
Hi, I upgraded my wall tablet from a Fire Tablet to a galaxy Tab. I also switched from the normal version of Fully to the App version. Since then every few hours or days the tablet just shows a black...
View ArticleClik here to view.
Struggling with Mushroom and Card mod
I’m trying to be able to modify image elements that are on a picture-elements card based on the value of an entity. I have narrowed down my problem into a simple example that suggests that card-mod is...
View ArticleHass Agent notify stopped working
I had the Hass Agent sending notifications to computers around our house. I recently set up VLANs for our network. The Raspberry Pi is in one subnet, computers in a second and IoT devices in third....
View ArticleNewbee in IoT
Hello, I need to design and develop my own hardware and firmware for Water management system in my home. I am already using plenty of smart devices from Sonoff, Shelly, Tapo, TATA EZ, Smart life etc....
View ArticleClik here to view.
Remove Orphaned Zigbee device
I cant figure out how to remove an orphaned Zigbee device using ZHA. There is no remove option for this device like there is for all of the other devices. I cant use the ZHA.REMOVE command, because I...
View ArticleMatch wled
My apologies if this is as much a question for the wled community as HA, but: Is it possible to use HA to tell wled lights to match my Hue lights? The problem is pretty straightfoward: Hue passes the...
View ArticleDifferent condition for different trigger
alias: "12pm, 3pm and 6pm" description: "" trigger: - platform: time at: "12:00:00" - platform: time at: "15:00:00" - platform: time at: "18:00:00" condition: - condition: template value_template: "{{...
View ArticleClik here to view.
[Wrong device] zigbee2mqtt TS0601_dimmer_knob recognized as TS0601_dimmer_1
Hello I have this device zigbee2mqtt.io TuYa TS0601_dimmer_knob control via MQTT | Zigbee2MQTT Integrate your TuYa TS0601_dimmer_knob via Zigbee2MQTT with whatever smart home infrastructure you are...
View ArticleWhat do the toggle settings in ZHA configuration actually do?
I can’t seem to find the answer to this anywhere. There are toggles in the ZHA configuration page with no details and nobody seems to know exactly what they do. What exactly do these settings do?...
View Article