Why is Z-Wave bloating my DB and how to reduce it?
@Un4Seen wrote: As I explained in another topic here, I’ve recently noticed my Home Assistant DB growing very large. Looking into the DB tables, it seems that by far the most events and states are...
View ArticleValue aggregator integration?
@Un4Seen wrote: I’ve recently learned that Home Assistant has these interesting integrations called “Recorder” and “History” which control how many days of events, sensor data, etc. are kept. That’s...
View ArticleHuge delays with Aeotec Z-Wave stick / concurrency issues
@gertvdijk wrote: I have a simple Z-Wave setup with the Aeotec Z-Wave stick, plugged into my relatively powerful workstation running Debian 10. It’s working fine most of the time, but I’m seeing huge...
View ArticleIntegrating Into Existing Home Server
@fhon wrote: Hi All, Sorry for following generic questions and perhaps their lack of detail but I’m new to Home Assistant and want to make sure I’m setting it up properly for my use case. I have a...
View ArticleMQTT Device Tracker in Zone
@andreaconfa wrote: Hi all, i have this code for track 2 bluetooth-le dongle device_tracker: - platform: mqtt source_type: bluetooth_le payload_home: 'presente' payload_not_home: 'not_home' devices:...
View ArticleFlux turn on lights
@MiguelAngelLV wrote: I have a Xiaomi Desk Lamp, when I have turn on the flux and turn off the lamp, flux turn on again. So I have turn off serveral times until the lamp stays off. If turn off the...
View ArticleAutomations.yaml format when edited via WEB
@seba wrote: Hello, a typical yaml automation obj would look like - alias: on entrance when motion detected id: '1573155948223' description: 'etc etc' ... when saving it automation via WEB it looks...
View ArticleSolarEdge - No data is being gathered
@lwolfs wrote: Newbie needs help. Setting up my new Raspberry Pi 4B with HomeAssistant and am not able to see SolarEdge data. I am moving from Domoticz to HA. Upgraded to the latest HA 0.103.3...
View ArticleClik here to view.
Help with Wallpanel MQTT Battery Sensor
@AdmiralRaccoon wrote: Hello, I´m trying to create a simple MQTT-Battery-sensor for the Wallpanel App from WallPanel WallPanel WallPanel is an Android application for Web Based Dashboards and Home...
View ArticleAlert component with tts (Google Home)
@dzungpv wrote: I use Alert component https://www.home-assistant.io/integrations/alert/ and i want it send message to Google Home speaker in my house, but it not exist. Some thing like this: alert:...
View ArticleESPHome switch configuration - HomeBridge
@Depechie wrote: I added a relay to my ESP8266 with following ESPHome yaml: switch: - platform: gpio id: relay pin: number: D6 inverted: False restore_mode: ALWAYS_OFF - platform: template name:...
View ArticleClik here to view.
Multiple devices in tado presence tracker
@McSodbrenner wrote: Hi, if I use Tado as presence tracker there is only one device shown in HA, but in the Tado app I have setup two devices. I’ve found this PR:...
View ArticleQuestion on script A calling script B calling script A (loops)
@Skye wrote: I have a problem with one of the zigbee valves I use, sometimes the target temp setting is not applied. I’ve created the following two scripts that call each other (entry point is an...
View ArticleClik here to view.
Impossible configure DuckDNS
@Mattmurd0ck wrote: Hi guys, I’m having some trouble configuring DuckDNS for my HA installation. When I try to reach https://mattxxxxx.duckdns.org, browser shows me “impossible to find the server”....
View ArticleRing Doorbell Chime (non-pro)
@biver wrote: Hey all, Is it possible to trigger the chime sound on a Ring Chime or better yet, play other sounds through it? It’s called a wi-fi enabled speaker which got me thinking… Thanks… Posts:...
View Article[Automation, HowTo?] Update/synchronize custom device only one attribute
@Domoticon wrote: Hi2UAll! I need some help synchronizing/updating rgb-values (only) from a custom Mqtt-device to a LED device. The source device is getting rgb-values from a custom MQTT-device to a...
View ArticleError after upgrading to Home Assistant 0.103.3 :Failed communicating with LMS:
@Codec303 wrote: Hi, I’m getting this error after upgrading from Home Assistant 0.103.2 to Home Assistant 0.103.3, and I’m not really sure what causing it: Failed communicating with LMS: <class...
View ArticleHow to stop zwave polling
@Sfmcfar wrote: How do I stop HA from polling my Zwave devices? My understanding is that you have to turn on polling at the device level (which I haven’t done) but I’m still seeing entries like this...
View ArticleHow to extend an entity configuration?
@WoJWoJ wrote: Home Assistant is becoming at home a core service to define entities, which are then acted upon via AppDaemon, the UI, … The problem I am facing is that the description (of a light for...
View ArticleClik here to view.
Heatmiser integration?
@ninjaef wrote: looking to purchase heatmiser 2 channel switch … Heatmiser UK Two Channel Wireless Receiver - Heatmiser RF Switch Heatmiser are market leaders in the manufacture of room thermostats...
View Article