@iris1801 wrote:
Hi guys, I’m running Ha core in a desktop with Ubuntu 18.4, I’m trying to integrate this tuya compatible zigbee hub to my ha but still no success.
The tuya component didn’t detect the hub, I also tried the pull device from configuration.yaml but still no success. Is anybody has a clue on how to integrate this?
Posts: 1
Participants: 1
@juan wrote:
I would like to be able to differentiate between switch and plug so that Google Home has the corresponding icon. In Home Assistant I do not care but in Google Home it is important.
Posts: 1
Participants: 1
@Alexanderdavice wrote:
Hi everybody,
I’m very new on Home Assistant, and I’ve just started playing with HASSIO.
I’m wondering on how I can create a general command to open-close all the 7 covers I have in my house.
All of them are recongnized and work fine, but if I create a group it is not a “cover.rolling shutter switch” entity but it is a “group” entity (this logic worked fine with the lights, and creating light group I directly use it as general command).Which logic I have to follow to solve this?
thanks for the help!
Posts: 2
Participants: 1
@Arsenal10108 wrote:
Is there a time template trigger for the last day of the month?
I would like to set up an automation that sends me a notification with the current status of a sensor every month at the end of the month. The sensor tracks the total amount of time a switch has been on for that month but if I forget to check it on the last of the month the sensor resets and there not way for me to view the previous data
Posts: 2
Participants: 2
@RienduPre wrote:
For some reason I have a lot of duplicate entities. One of the 2 is unavailable and that is the one I need to delete because this one is not correct. See screenshot:
I’m using HASS.io, latest versions.
Thanks for you help.
Posts: 2
Participants: 2
@SylvainGa wrote:
Hi, when using a ‘unavailable’ state filter, I can’t hide the header toggle button. This what I have for that card:
entities: - entity: light.lumiereexterieur - entity: light.lumieregarage : : Much more entities here : - entity: sensor.humiditesalledebain_si7021_humidity - entity: light.nodemcu state_filter: - unavailable show_header_toggle: false theme: slate type: entity-filterEnd this is what I get:
Is this a bug or am I doing something wrong in that card?
Thanks.
Posts: 2
Participants: 2
@bonestaak wrote:
I tried to install HACS, before that I had to empty the browser buffer, which has already been done several times, also tried other browser. HACS does not show up after the plus in configuration Eventually hard reset by restarting the Raspberry, so then I got these error messages and save mode where I no longer come out:
Login attempt or request with invalid authentication from 172.30.33.318:43:58 – http (WARNING) - bericht kwam voor het eerst om 16:12:20 en verschijnt 1810 malen
Error executing service <ServiceCall homeassistant.restart (c:ef5d8e48434a41b6baa8c094df074a21)>
18:34:46 – helpers/config_validation.py (ERROR) - bericht kwam voor het eerst om 16:55:03 en verschijnt 4 malen
Error loading /config/configuration.yaml: while scanning for the next token found character ‘\t’ that cannot start any token in “/config/configuration.yaml”, line 27, column 1
16:50:05 – Hass.io (ERROR)
while scanning for the next token found character ‘\t’ that cannot start any token in “/config/configuration.yaml”, line 27, column 1
16:50:05 – util/yaml/loader.py (ERROR)
Invalid certificate found: e371hs45ccljxstyhf1tg8dzldkqghjv.ui.nabu.casa
16:11:57 – main.py (WARNING)
Don’t use ‘server_host’ options with Hass.io
16:11:55 – Hass.io (WARNING)I don’t have a line 27
Posts: 7
Participants: 3
@d.lee wrote:
Had this working from a previous install but not sure why it isn’t working now. Taking the battery state of the wyzesense and making battery sensors. Fails configuration check for unit_of_measurement. Any ideas would be appreciated:
- platform: template sensors: battery_office_window: friendly_name: "Office Window Battery Level" entity_id: binary_sensor.wyzesense_xxxxxxxx unit_of_measurement: '%' value_template: >- {{ state_attr('binary_sensor.wyzesense_xxxxxxxxx', 'battery_level') }} device_class: battery icon_template: mdi:batteryThrows back the following when I check configuration:
Invalid config for [binary_sensor.template]: [unit_of_measurement] is an invalid option for [binary_sensor.template]. Check: binary_sensor.template->sensors->battery_office_window->unit_of_measurement. (See ?, line ?).Based on what I read here about battery sensors:
Posts: 3
Participants: 2
@jono wrote:
I’m wanting to place a picture-entity within a ‘regular’ card along with some entities.
I did this using a vertical stack, but it puts the entities in 1 card, and the image in another card
- type: vertical-stack cards: - type: entities entities: - entity: sensor.sammy_xbox_status - type: picture-entity entity: sensor.xbox_sammy_playing show_name: false show_state: false state_image: "Wreckfest": /local/xbox-wreckfest.png "Fortnite": /local/xbox-banner-fortnite.jpg "Not Playing": /local/xbox-banner-none.png
This is how I'd like it to look
I’m guessing (hoping) this can be done somehow. Anyone know how?
Posts: 2
Participants: 2
@groym wrote:
New to Home Assistant. I am running the latest HassIO on a NUC, with a HUSBZB-1. The system properly recognizes the ZWave USB port and the ZHA USB port. I am using a SmartenIT IOT8-Z Zigbee module for rain water and irrigation control. The IOT8-Z has 4 digital inputs, 2 analog inputs and 8 relay outputs. I can add this device in ZHA and the 2 analog inputs and the 8 relay outputs automatically get discovered and populated upon pairing. However, the 4 digital inputs do not appear. Yet, when testing in pairing mode, if I manually change the input level on any of the 4 digital input pins, I do see a proper Zigbee event in the logs.
Has anyone else attempted to use this specific device? I’m a bit stumped
Thx
Posts: 1
Participants: 1
@hillbicks wrote:
Hey guys,
I was wondering what you guys are doing in order to automate the vacuum a bit more. currently i have several automations for the start of the two robots that I have. I still have to remember to empty the bin after every other run and of course I’d like to automate that as well by sending the robot to bin.
I think it either has to be done by calculating the total number of runs since it was last emptied. I think it would be better though to use the total m² cleaned since the bin was last emptied since 1 cleaning run of the kitchen fills the bin way less than a complete run.
Here is what I’m thinking of implementing:
- Upon returning state of the vacuum add the value of last clean run to an input_number sensor
- Once somebody is near the bin (triggered by light turning on or google home starts playing) AND the value of the input_number sensor is higher than, let’s say, 120, drive the vacuum to the bin and reset the input_number to 0.
How are you guys doing this?
Posts: 2
Participants: 2
@DkAutomater wrote:
Hi guys.
Since i upgraded to: Home Assistant Core 0.107.7 i cant add new cards in Lovelace, i could do this before the upgrade.
I have adguard running, but i dont see any blocked connection to some where.
Can it be my Raw configuration editor i have to re arrange something now?
Its gonna take forever, is there any fix?
Posts: 1
Participants: 1
@Venice wrote:
Hi,
I build a Dashboard for my media control.
I use the Harmony Hub with activities to control my devices.
It works very well, but what I am missing is to show the current state via a button.As you can see on my screenshot, I have several buttons which trigger an activity on my harmony hub. For example Spotify.
- entity: remote.wohnzimmer icon: 'mdi:spotify' icon_height: 32px name: Spotify show_icon: true show_name: true tap_action: action: call-service service: remote.turn_on service_data: activity: 36772906 entity_id: remote.wohnzimmer theme: Backend-selected type: entity-buttonI want to change the color of the button if the activity is active.
I was only able to include the activity in the picture card with a template sensor.I would be very happy if someone could help me
Tobias
Posts: 1
Participants: 1
@Mr_hairy wrote:
Hi everyone,
This seems like one of those real basic things, but I cant seem to find anything firm on it.
I have a Sonoff bridge running Tasmota 8.20. I would like to add a temperature sensor and from what I can see, zigbee is now compatible with Tasmota 8.2.Will https://smile.amazon.co.uk/Aqara-Temperature-Environmental-Intelligent-Connection/dp/B07R9VCQ5N/ref=sr_1_39?crid=1MARWK0Y9AGE&dchild=1&keywords=temperature+humidity&qid=1586118371&sprefix=Temperature+humi%2Caps%2C186&sr=8-39 work with what I have or is another temp sensor I should be looking at.
Thanks
Posts: 1
Participants: 1
@FlangeMonkey wrote:
Hi Guys,
Quick question, I’ve setup Smartthings integration before I had anything really in Home-Assistant. I’ve started to migrate devices over and it appears to be one-way (Smartthings devices on Home-Assistant) is this normal?
I’ve seen a couple of threads but they appear old as they relate to the MQTT Broker and I’ve used the native intergration.
Also, I removed a device from Smartthings and it still appears in Home-Assistant.
It just feels like something is broken…
Thanks,
Posts: 1
Participants: 1
@jriker1 wrote:
I rebooted my HA Ubuntu server yesterday and one of the tabs on my Lovelace panel are now blank. Used to have two cards showing my printer status, not just show:
Should note there are no errors in the log. I just edit my Lovelace with Configure UI.
Posts: 1
Participants: 1
@Alessandro_Bacioccol wrote:
Hello Forum,
i started to connect my Arduino to Home Assistant using MQTT protocol.
I have to pass some parameters defined with input-number integration to Arduino then I create a button on the front end with the following code:type: button tap_action: action: call-service service: mqtt.publish service_data: topic: Hassio payload: '{{ states.input_number.box1.state | int }}'The issue i am founding is that the payload is not the number of the input_number but it’s a string containing “{{ states.input_number.box1.state | int }}”.
What i did wrong?
Thanks in advance
Alessandro
Posts: 1
Participants: 1
@dzkahn wrote:
I have this in my configuration.yaml
recorder: purge_keep_days: 2 purge_interval: 1 exclude: entities: - binary_sensor.family_room_motion_detector - binary_sensor.hallway_motion_detectorhome-assistant_v2.db continues to grow and it is not being purged, the exclude entities is working fine
Any ideas
Posts: 1
Participants: 1
@phixion wrote:
I keep running into the issue of collecting way too much abandoned sensors, old devices, dead light bulbs and whatnot over the time. I went back and forth with different naming schemes to make use things like auto-entities and filters but nothing really worked out. It would rock if the vscode extension was aware of that and just mark them.
how do you keep track and clean your stuff up?
Posts: 1
Participants: 1
@danphillips wrote:
Hi Guys,
Im getting random letters from MQTT cmd in tasmota console. See below. Any ideas where these are coming from?
22:40:19 CMD: ]E3 22:40:29 CMD: Ue 22:40:29 MQT: stat/Garden_Lights_Trigger/RESULT = {"Command":"Unknown"} 22:40:34 CMD: 22:40:34 CMD: mq 22:40:34 MQT: stat/Garden_Lights_Trigger/RESULT = {"Command":"Unknown"} 22:40:39 CMD: R 22:40:39 MQT: stat/Garden_Lights_Trigger/RESULT = {"Command":"Unknown"} 22:41:06 CMD: 22:41:08 CMD: 22:41:08 CMD: 22:41:11 CMD: 22:41:12 CMD: 22:41:13 CMD: QA 22:41:13 MQT: stat/Garden_Lights_Trigger/RESULT = {"Command":"Unknown"} 22:41:13 CMD: 22:41:16 CMD: A 22:41:16 MQT: stat/Garden_Lights_Trigger/RESULT = {"Command":"Unknown"} 22:41:16 CMD: 22:41:19 CMD: MM 22:41:19 MQT: stat/Garden_Lights_Trigger/RESULT = {"Command":"Unknown"} 22:41:24 CMD: *R 22:41:25 CMD: "b
Posts: 1
Participants: 1
