One automation triggered at each restart, why?
@makai wrote: I have this automation that is triggering each time I restart HA (Configuration > Server Controls > Restart) even if the trigger is not matching: - alias: Notification - Ouvrir les...
View ArticleClik here to view.
Problem with a Shelly 2.5 using MQTT
@sermayoral wrote: Hi everyone. Sometimes I have problems with a Shelly 2.5 that controls a roller shutter. It usually happens some night when the router changes public IP and the router may be...
View ArticleTimer using input_number that is dynamically updated
@Cezex wrote: I want to use input_number (slider) as a dynamically updated timer - meaning: I set it to 30min Every minute the slider is decreased by 1min After the slider is 0min an automation is run...
View ArticleClik here to view.
Input_datetime as offset for sun event trigger
@Sparks wrote: Fellow HA´ers, As a last resort, I need your help on the below: I am extensively using sunset and sunrise as triggers for various automations. I use the UI to configure automations, and...
View ArticleHow to raise an alert when a zigbee error message is received?
@heisenberg wrote: In most of the issues I have with my zigbee devices or network there is some error message in the zigbee2mqtt log (starting with zigbee2mqtt:error), is there any way to trigger an...
View ArticleMQTT Broker duplicate
@robb1 wrote: Hi all In my initial HassIO setup I used mqtt with an existing broker running on a separate Raspi to HassIO. When time came to move to a broker on the HassIO (also a Raspi) I had some...
View ArticleLG webOS change source type
@Machaeon wrote: I have PC connected to HDMI 1 so I set source type for this input as PC. When I running Kodi player to watch a movie I want change source type to BD Player to have access to TruMotion...
View ArticleNew sensor / integration without restart?
@prankousky wrote: Hello everyone, while I pointlessly used to always restart Home Assistant after adding automations, scripts, etc., I eventually realized I could do this via settings > server...
View ArticleClik here to view.
Strange error about script, and attribute lower, neither of which are used in...
@Mariusthvdb wrote: please check with me…I am lost Ive made an error in the bottom line (referencing the trigger.to_state, while I should have referenced the binary_sensor in the condition. Having...
View ArticleRESTful sensor json_attributes_path (template / scripting)
@gwillen wrote: Can’t seem to get JSONPath to work with a script. This works perfect in the JSONPath evaluation tool but doesn’t work in homeassistant. I have also tried templates and it doesn’t seem...
View ArticleClik here to view.
Automation integration could not be setup?
@markmghali wrote: Log Details (ERROR) Hello, After upgrading to 0.110 I now have this error in my log: Logger: homeassistant.config Source: config.py:404 First occurred: 10:17:19 AM (6 occurrences)...
View ArticleUPNP wont stop discovering everything; I can't disable it!
@zenko18 wrote: My HA is going nuts with upnp, and discovering everything and filling up my integrations page with entities that I keep ignoring. I am trying to disable it entirely, or certain...
View ArticleLeviton Load Center supported?
@garyjlo wrote: I’m considering replacing my electrical panel with a Leviton Load Center but I was not able to find any information on if Home Assistant has any support for this (power monitoring,...
View ArticleSnapshot from generic camera (RTSP) always return a copy of still_image_url...
@gsubiran wrote: Im trying to automate a snapshot from generic camera (RSTP) every X time. I’m generating and saving snapshot ok, but the problem is that the generated snapshot is allways the...
View ArticleGoogle Calendar Integration SLL error
@Tyler_Terzigni wrote: I am receiving the following SSL error for the google-calendar integration. Was working fine untill recently. Error executing service: <ServiceCall google.scan_for_calendars...
View ArticleAlarm clock script: (transition) light
@Petter_Aarak wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Aeotec USB Z-Wave Plus initial installation
@Lutehi-Gregor wrote: Good evening, I really hope someone can help me to fix my problem. I ordered a Z-Wave Controller to command my Z-Wave switch’s over Hassio. But now I have the problem that, if I...
View ArticleCan you detect an RF signal in HA using something like the Broadlink RM4 Pro?
@rogersmj wrote: I am in the middle of figuring out motorized/automated roller shades and I’m wondering if there’s a way to a Broadlink or other device to “detect”/receive certain RF signals and send...
View ArticleWriting to Zigbee devices development cluster?
@theherb007 wrote: Using ZHA with a Conbee II and a Sinope thermostat (TH1300ZB). I’ve pulled over the custom_component from a dev branch that includes climate support in ZHA. Thermostat works...
View ArticleWebOS WOL Across Subnets
@Pashovski wrote: Recently switched to Unifi gear. Created a subnet for IoT and firewall rules, and a different one for Home Assistant. WebOS TV will not wake on lan anymore, now that I have it in...
View Article