Clik here to view.
Device button with 4 different actions
@Rod_Poplarchick wrote: DEVICE BUTTON WITH 4 DIFFERENT ACTIONS Tasmota Version 8.3.1 button and switch commands. This works 1 short press, 2 short press, 3 short press and long press on tasmota...
View ArticleBroadlink: Which is best, Switch or Remote for roller shades?
@richaldalbin wrote: Hello all, I have both Broadlink Switch and Remote set up and working. I understand Remote is newer and could be better ? I would not need it to grab RF codes (got that covered...
View ArticleCondition: Last button press at least an hour ago
@dantist wrote: I have an automation that I would like to add a condition to. The last press of a specific Hue Smart Button must be at least an hour ago. Normally I would use something like that: -...
View ArticleRest platform and json_attributes_path
@papoo wrote: hi all y use a rest platform sensor with this configuration json_attributes_path: "$.records[0].fields" json_attributes: - start_date - end_date - description it work’s fine but how can...
View ArticleAutomation trigger on device attributes
@Pernod wrote: Hi All, I have a Marantz amp set up, but I would like to trigger an automation (to adjust it’s volume) based on the source it’s playing. I know it’s I very basic question, but I’m...
View ArticleClik here to view.
Device Tracker Help/Issue
@kmwhiten wrote: So I am not sure if this is a bug or something else is going on. First here is my setup: Using two device tracker platforms, ping and bluetooth. Ping is set to 600 seconds and...
View ArticleBluetooth device help
@ddavis1086 wrote: Hello all. Not sure this it best place to ask, please forgive me if it’s not. I have a device that is bluetooth only that I can connect it to my iphone to control it. I would like...
View ArticleAqara Hub - HomeKit - Alarm Control Panel Won't Arm
@jjross wrote: Ok, so I’ve running 0.110.3 and I’ve decided to try and add my Aqara Hub back into the system as I’ve seen there are significant improvements to the HomeKit Controller. I was very happy...
View ArticleZ2M - CC1352-P2 updated to latest firmware, can't send payloads
@TheStigh wrote: Hi, Updated to the latest Z-Stack_3.x.0 CC1352P_2_20200417 and after this I can’t send commands with payloads. All sensors report fine and I can see the data in the log, but if I try...
View ArticleClik here to view.
Mini Graph Card Question/Error
@carltonb wrote: I have installed the mini-graph-card-bundle through HACS. It is listed appropriately in the ui-lovelace file. This is what I get when I reload HA. Here is my code. # # Atmospheric...
View ArticlePermanent CacheLoad with Aeotec Water Sensor
@czrabode wrote: Hello. I have a Raspberry Pi 4 with a GoControl HUSBZB-1 USB stick. I installed several Aeotec Z-Wave Water Sensors along with other Z-Wave devices. However, when I go to the Z-Wave...
View ArticleNanoMote with OpenZwave (beta) automation
@keith-michael wrote: Hey guys, I had some trouble getting the Nanomote to work with OpenZwave beta and thought I would post my working automation - which I could not have solved without the fantastic...
View ArticleClik here to view.
Xiaomi Battery Level adjustment template | Need help with rounding
@xbmcnut wrote: Wondering if I could get some template help please as my batteries levels from all of my Xiaomi gateway sensors report the battery level about 15% higher than actual I first insert...
View ArticleLutron RA2 SeeTouch Problems
@Stephen90 wrote: Hi have a bunch of SeeTouch controls in my home and am new to HA. I have set up HA and am able to control RA2 dimmers though out my home, I am also able to use SeeTouch buttons to...
View ArticledeCONZ Confusion
@terry5008 wrote: Hello, I’m a noob running Home Assistant 0.110.3 on a VM in vBox (used the VMDK install). I bought a ConBee II to control ZigBee lights. The ConBee is showing up on /dev/ttyACM1, or...
View ArticleClik here to view.
Webhook call reporting invalid json
@mysticpeanut wrote: Hi All I just recently upgraded from version 0.7x.x to 0.110. I run HA on Ubuntu 16.04.6 in a virtual environment. Previously I’ve been using api passwords to make external calls...
View ArticleCurl command reading state to a file
@dex857 wrote: curl -X GET -H ‘Content-Type: application/json’ ‘http://my-ip:8123/api/states/aeon_labs_dsb09104_home_energy_meter_energy_3?api_password=token’ -o /config/tmp/energybaseline.txt" I get...
View ArticleClik here to view.
MQTT Integration Broker Information IP address, right?
@steveo94y wrote: I am having trouble setting up this integration with the UI. I am going through the UI when trying to add this integration. Based off of the information here:...
View ArticleHomekit Bridge cannot be paired on iPhone
@kurisutian wrote: Did anyone successfully get the homekit bridge running? Somehow the component cannot be connected. Got the latest HA installed on an RPi3 at a friends place and he wanted to get the...
View ArticleMake magnetic switch into sensor
@Fredrik13 wrote: Hello I have a magnetic switch from Telldus, that shows up in HA as a switch, where the states are “on” and “off”. I am going to use in to see if my garage door is open or not. It is...
View Article